# Linear Actuator

**URL:** <https://forum.snapmaker.com/t/linear-actuator/3017>\
**Category:** Original (3-in-1)\
**Created:** [June 29, 2018, 3:48pm UTC](https://forum.snapmaker.com/t/linear-actuator/3017 "2018-06-29T15:48:29Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tone](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/tone/32/1278_2.png) [@Tone](https://forum.snapmaker.com/u/Tone)\
**Post date:** [June 29, 2018, 3:48pm UTC](https://forum.snapmaker.com/t/linear-actuator/3017/1 "2018-06-29T15:48:30Z")

</div>

This topic is for discussion on the linear actuators.

---

<div class="post-metadata">

**Author:** ![Tone](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/tone/32/1278_2.png) [@Tone](https://forum.snapmaker.com/u/Tone)\
**Post date:** [June 29, 2018, 3:50pm UTC](https://forum.snapmaker.com/t/linear-actuator/3017/2 "2018-06-29T15:50:05Z")

</div>

Does anyone know what brand of Stepper Motors the SnapMaker uses?  
What I’m looking for the is spec sheet that describes the performance specs for the motor.

---

<div class="post-metadata">

**Author:** ![xiwangkou](https://avatars.discourse-cdn.com/v4/letter/x/7feea3/32.png) [@xiwangkou](https://forum.snapmaker.com/u/xiwangkou)\
**Post date:** [March 4, 2020, 8:01am UTC](https://forum.snapmaker.com/t/linear-actuator/3017/3 "2020-03-04T08:01:47Z")

</div>

I always use this brand stepper motor:  
[https://www.oyostepper.com/](https://www.oyostepper.com/)

---

<div class="post-metadata">

**Author:** ![EdOliver7](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/edoliver7/32/4278_2.png) [@EdOliver7](https://forum.snapmaker.com/u/EdOliver7)\
**Post date:** [April 6, 2020, 5:28pm UTC](https://forum.snapmaker.com/t/linear-actuator/3017/4 "2020-04-06T17:28:00Z")

</div>

Would it be this one? Nema 17 Stepper Motor Bipolar 1.8 deg 44Ncm (62.3oz.in) 0.85A 5.3V 42x42x48mm 4 Wires

Thank you!

---

<div class="post-metadata">

**Author:** ![gjo](https://avatars.discourse-cdn.com/v4/letter/g/2acd7d/32.png) [@gjo](https://forum.snapmaker.com/u/gjo)\
**Post date:** [June 18, 2020, 8:59am UTC](https://forum.snapmaker.com/t/linear-actuator/3017/5 "2020-06-18T08:59:10Z")

</div>

Hi Tone

Did you find the spec sheet for the stepper motor used. or do you know if its a 0.9 deg (400step/rev) or 1.8 deg (200step/rev)