# Lightburn (via USB) will engrave but not cut

**URL:** <https://forum.snapmaker.com/t/lightburn-via-usb-will-engrave-but-not-cut/39079>\
**Category:** Third Party Software\
**Tags:** Laser\
**Created:** [March 8, 2025, 7:17pm UTC](https://forum.snapmaker.com/t/lightburn-via-usb-will-engrave-but-not-cut/39079 "2025-03-08T19:17:58Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![krash94](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/krash94/32/17003_2.png) [@krash94](https://forum.snapmaker.com/u/krash94)\
**Post date:** [March 8, 2025, 7:17pm UTC](https://forum.snapmaker.com/t/lightburn-via-usb-will-engrave-but-not-cut/39079/1 "2025-03-08T19:17:58Z")

</div>

Weirdest thing- I’m outputting a file for USB transfer using Lightburn on my A350 and it works fine for engraving the image, but my layer with 100% power and 300 mm/sec (or really anything else) just… runs fast and engraves. I’ve tried both marlin and GRBL profiles, I’ve tried a file with only cutting a simple box, and no matter what it’s running fast and won’t slow down and cut.

Latest versions on everything. 10W laser. Sue to distance I am unable to direct connect and run the file locally on the SM2.

---

<div class="post-metadata">

**Author:** ![Skreelink](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/skreelink/32/16398_2.png) [@Skreelink](https://forum.snapmaker.com/u/Skreelink)\
**Post date:** [March 8, 2025, 7:23pm UTC](https://forum.snapmaker.com/t/lightburn-via-usb-will-engrave-but-not-cut/39079/2 "2025-03-08T19:23:57Z")

</div>

300mm/sec is faster than the Snapmaker can even move. 😛 You’ll want to be working in mm/min. For reference, 300mm/sec is 18,000mm/min. Engraving is usually done below 6000mm/min. Post your Lightburn settings and an example gcode file.

---

<div class="post-metadata">

**Author:** ![krash94](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/krash94/32/17003_2.png) [@krash94](https://forum.snapmaker.com/u/krash94)\
**Post date:** [March 8, 2025, 7:27pm UTC](https://forum.snapmaker.com/t/lightburn-via-usb-will-engrave-but-not-cut/39079/3 "2025-03-08T19:27:28Z")

</div>

Ugh, this is a rookie mistake… fixing and testing again!

---

<div class="post-metadata">

**Author:** ![krash94](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/krash94/32/17003_2.png) [@krash94](https://forum.snapmaker.com/u/krash94)\
**Post date:** [March 8, 2025, 9:13pm UTC](https://forum.snapmaker.com/t/lightburn-via-usb-will-engrave-but-not-cut/39079/4 "2025-03-08T21:13:25Z")

</div>

Yep, not sure how or when I switched over and then I just… yeah. You’d think after 5 years of owning this I wouldn’t make this kind of mistake! Thank you, easy fix, and only me ego hurt.

---

<div class="post-metadata">

**Author:** ![Skreelink](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/skreelink/32/16398_2.png) [@Skreelink](https://forum.snapmaker.com/u/Skreelink)\
**Post date:** [March 8, 2025, 9:16pm UTC](https://forum.snapmaker.com/t/lightburn-via-usb-will-engrave-but-not-cut/39079/5 "2025-03-08T21:16:09Z")

</div>

At least it was a simple fix. 🙂 Much better than having to go through troubleshooting and the like.
