# Leveling / First layer Problems **URL:** \ **Category:** Snapmaker2.0 Troubleshooting guides\ **Created:** [June 29, 2021, 5:58pm UTC](https://forum.snapmaker.com/t/leveling-first-layer-problems/19563 "2021-06-29T17:58:00Z")\ **Posts on this page:** 1\ **Showing post:** 16
**Author:** ![brent113](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/brent113/32/11114_2.png) [@brent113](https://forum.snapmaker.com/u/brent113)\ **Post date:** [July 1, 2021, 9:37pm UTC](https://forum.snapmaker.com/t/leveling-first-layer-problems/19563/16 "2021-07-01T21:37:28Z")
An option is to use Tone’s tweak macro script to adjust each mesh point individually to compensate for the measurement error. It’s based around issuing `M421 Q` commands ([Set Mesh Value | Marlin Firmware](https://marlinfw.org/docs/gcode/M421.html)) to adjust each point a bit. > [@SM2 Bed Leveling 101](https://forum.snapmaker.com/t/sm2-bed-leveling-101/6146): > > I’ve been working on the problems with SM2’s bed leveling issues for a while now. I’ve created some Google Sheets that can help with the process. The “Introduction” page will give some background. If you have any problems at all, please ask. I’m open to any feedback or suggestions. With the link below you can copy the Sheets to your own Google sheet or do a “File:Download” menu selection to save it to your local machine. Maybe this will only be useful for a short while because Snapmaker will fi… --- _[View the full topic](https://forum.snapmaker.com/t/leveling-first-layer-problems/19563)._