# Left Nozzle doesnt move vertically

**URL:** <https://forum.snapmaker.com/t/left-nozzle-doesnt-move-vertically/38676>\
**Category:** Artisan Troubleshooting guides\
**Created:** [January 6, 2025, 10:01am UTC](https://forum.snapmaker.com/t/left-nozzle-doesnt-move-vertically/38676 "2025-01-06T10:01:41Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![soletto](https://avatars.discourse-cdn.com/v4/letter/s/96bed5/32.png) [@soletto](https://forum.snapmaker.com/u/soletto)\
**Post date:** [January 6, 2025, 10:01am UTC](https://forum.snapmaker.com/t/left-nozzle-doesnt-move-vertically/38676/1 "2025-01-06T10:01:42Z")

</div>

Hallo,  
is it normal that only the right nozzle moves up and down within the dual extrusion module?  
and the left nozzle remain unchanged?

Thank you, best regards Stefan

---

<div class="post-metadata">

**Author:** ![Wyphorn](https://avatars.discourse-cdn.com/v4/letter/w/ebca7d/32.png) [@Wyphorn](https://forum.snapmaker.com/u/Wyphorn)\
**Post date:** [January 6, 2025, 11:45am UTC](https://forum.snapmaker.com/t/left-nozzle-doesnt-move-vertically/38676/2 "2025-01-06T11:45:23Z")

</div>

yes, that’s normal.

---

<div class="post-metadata">

**Author:** ![soletto](https://avatars.discourse-cdn.com/v4/letter/s/96bed5/32.png) [@soletto](https://forum.snapmaker.com/u/soletto)\
**Post date:** [January 6, 2025, 11:47am UTC](https://forum.snapmaker.com/t/left-nozzle-doesnt-move-vertically/38676/3 "2025-01-06T11:47:25Z")

</div>

ok thank you, i wa thinking my modul has a malfunction