# LED On at Start of every print

**URL:** <https://forum.snapmaker.com/t/led-on-at-start-of-every-print/43736>\
**Category:** Feature Requests\
**Tags:** Firmware, U1, menu, led, light\
**Created:** [October 22, 2026, 9:48am UTC](https://forum.snapmaker.com/t/led-on-at-start-of-every-print/43736 "2026-10-22T09:48:01Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![ColdCoffee](https://avatars.discourse-cdn.com/v4/letter/c/b9e5f3/32.png) [@ColdCoffee](https://forum.snapmaker.com/u/ColdCoffee)\
**Post date:** [October 22, 2026, 9:48am UTC](https://forum.snapmaker.com/t/led-on-at-start-of-every-print/43736/1 "2026-10-22T09:48:01Z")

</div>

### ✅ I have searched this category and verified this feature request does NOT already exist.

on

### 1. Feature Summary

The U1 auto turns off the LED after a print finishes but would be nice to have a set and forget switch to have it auto turn ON at the start of every print

### 2. Why this feature is needed

The error detection AI works alot better with the LED on and its easier to glance at the camera feed to see how a print is coming along with the lights on

### 3. Expected outcome

Change the toggle switch in the menu to Off/Manual/Every Print

### Affected Products

Snapmaker U1 Firmware