# Latest firmware cannot print alignment test print

**URL:** <https://forum.snapmaker.com/t/latest-firmware-cannot-print-alignment-test-print/41590>\
**Category:** J1/J1s IDEX\
**Created:** [March 25, 2026, 7:51pm UTC](https://forum.snapmaker.com/t/latest-firmware-cannot-print-alignment-test-print/41590 "2026-03-25T19:51:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![phil123456789](https://avatars.discourse-cdn.com/v4/letter/p/8e7dd6/32.png) [@phil123456789](https://forum.snapmaker.com/u/phil123456789)\
**Post date:** [March 25, 2026, 7:51pm UTC](https://forum.snapmaker.com/t/latest-firmware-cannot-print-alignment-test-print/41590/1 "2026-03-25T19:51:17Z")

</div>

Hi,

received a replacement motherboard today

checked the firmware it says up to date

yet although calibration worked fine, the alignment test cannot print

there is an ‘adjust’ button, I can heat up everything, but no filament can be loaded (load/unload buttons never show up)

and no print button ever appears

anyone has the same problem ?

thanks

---

<div class="post-metadata">

**Author:** ![phil123456789](https://avatars.discourse-cdn.com/v4/letter/p/8e7dd6/32.png) [@phil123456789](https://forum.snapmaker.com/u/phil123456789)\
**Post date:** [March 26, 2026, 8:48pm UTC](https://forum.snapmaker.com/t/latest-firmware-cannot-print-alignment-test-print/41590/2 "2026-03-26T20:48:31Z")

</div>

made a firmware update from USB and now it is even worst, the right printhead rams into the left one during XY calibration