# Laser stop in second run

**URL:** <https://forum.snapmaker.com/t/laser-stop-in-second-run/39305>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [April 18, 2025, 3:56pm UTC](https://forum.snapmaker.com/t/laser-stop-in-second-run/39305 "2025-04-18T15:56:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ronsky10](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/ronsky10/32/14656_2.png) [@Ronsky10](https://forum.snapmaker.com/u/Ronsky10)\
**Post date:** [April 18, 2025, 3:56pm UTC](https://forum.snapmaker.com/t/laser-stop-in-second-run/39305/1 "2025-04-18T15:56:28Z")

</div>

Why is the laser not cutting when it is moving. It stop halve way and I can’t stop the proces.  
It is finishing the program without cutting

---

<div class="post-metadata">

**Author:** ![Wyphorn](https://avatars.discourse-cdn.com/v4/letter/w/ebca7d/32.png) [@Wyphorn](https://forum.snapmaker.com/u/Wyphorn)\
**Post date:** [April 18, 2025, 4:23pm UTC](https://forum.snapmaker.com/t/laser-stop-in-second-run/39305/2 "2025-04-18T16:23:29Z")

</div>

Are you using lightburn?  
Can you share the NC file?
