# Laser stop after few minut

**URL:** <https://forum.snapmaker.com/t/laser-stop-after-few-minut/24638>\
**Category:** Original (3-in-1)\
**Created:** [March 2, 2022, 11:14pm UTC](https://forum.snapmaker.com/t/laser-stop-after-few-minut/24638 "2022-03-02T23:14:14Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![marco28](https://avatars.discourse-cdn.com/v4/letter/m/a5b964/32.png) [@marco28](https://forum.snapmaker.com/u/marco28)\
**Post date:** [March 2, 2022, 11:14pm UTC](https://forum.snapmaker.com/t/laser-stop-after-few-minut/24638/1 "2022-03-02T23:14:14Z")

</div>

Hi, i have Snapmaker original with 200mW laser module.  
I create the file with Lubian and i generate the gcode in usb.  
I start to engrave but after few minut the machine stop and don’t start again… if i press the button pause and after the button continue the machine restart but few minut after stop again…  
i try to wait more time before press the button, like 1 hour but nothing happen…  
am I wrong in something?

---

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [March 4, 2022, 7:11pm UTC](https://forum.snapmaker.com/t/laser-stop-after-few-minut/24638/2 "2022-03-04T19:11:43Z")

</div>

Do you have a original-enclosure?  
There is maybe a faulty door-detection?

> **[What should I do if the laser is weak or there is no light at all when it is on?](https://support.snapmaker.com/hc/en-us/articles/360040934094-What-should-I-do-if-the-laser-is-weak-or-there-is-no-light-at-all-when-it-is-on-)**
>
> 1) If you do not have an enclosure and you are using the Snapmakerjs 2.6.1/2.7.1, please disable the "door detection" feature as shown below. You need to connect the machine with a computer to clos...

---

<div class="post-metadata">

**Author:** ![marco28](https://avatars.discourse-cdn.com/v4/letter/m/a5b964/32.png) [@marco28](https://forum.snapmaker.com/u/marco28)\
**Post date:** [March 4, 2022, 9:52pm UTC](https://forum.snapmaker.com/t/laser-stop-after-few-minut/24638/3 "2022-03-04T21:52:15Z")

</div>

Hi, i don’t know witch Snapmaker original have, i have the enclosure but not connected.  
when the machine stop there isn’t any message on the lcd.  
I try to make your suggestion and after i tell you something later.  
for now i have 2 option:

1. i have upgrade the firmware with 2.11 some time ago and only now i use the laser(i already try to download the new and upgrade it)
2. maybe the problem is only when use a usb(i already try to change pen)

thank you very much

---

<div class="post-metadata">

**Author:** ![marco28](https://avatars.discourse-cdn.com/v4/letter/m/a5b964/32.png) [@marco28](https://forum.snapmaker.com/u/marco28)\
**Post date:** [March 5, 2022, 11:15am UTC](https://forum.snapmaker.com/t/laser-stop-after-few-minut/24638/4 "2022-03-05T11:15:17Z")

</div>

today I did some test, and the problem it’s only when I use a usb stick, if I connect the laser to pc the machine does not stop.

---

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [March 6, 2022, 6:17pm UTC](https://forum.snapmaker.com/t/laser-stop-after-few-minut/24638/5 "2022-03-06T18:17:58Z")

</div>

Try some other usb thumb drives to get sure your stick is defective.

---

<div class="post-metadata">

**Author:** ![marco28](https://avatars.discourse-cdn.com/v4/letter/m/a5b964/32.png) [@marco28](https://forum.snapmaker.com/u/marco28)\
**Post date:** [March 20, 2022, 8:25pm UTC](https://forum.snapmaker.com/t/laser-stop-after-few-minut/24638/6 "2022-03-20T20:25:43Z")

</div>

i see that if I use a old version of software it’s ok