# Laser not coming on when setting origin after firmware update

**URL:** <https://forum.snapmaker.com/t/laser-not-coming-on-when-setting-origin-after-firmware-update/29937>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Tags:** High\_Speed\_Firmware, Laser\
**Created:** [March 1, 2023, 10:21pm UTC](https://forum.snapmaker.com/t/laser-not-coming-on-when-setting-origin-after-firmware-update/29937 "2023-03-01T22:21:50Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Dinkelborg](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/dinkelborg/32/7228_2.png) [@Dinkelborg](https://forum.snapmaker.com/u/Dinkelborg)\
**Post date:** [March 2, 2023, 6:47pm UTC](https://forum.snapmaker.com/t/laser-not-coming-on-when-setting-origin-after-firmware-update/29937/2 "2023-03-02T18:47:54Z")

</div>

Are you by any chance trying to print with an open door? Maybe you are experiencing the same or a related issue to [what I’m currently noticing](https://forum.snapmaker.com/t/door-detection-cannot-be-turned-off-at-all/29955/2)

In that case maybe you can try to tape magnets to the door detection module too - its the black box in the middle of the door frame where both doors meet when closed in my experience the magnets needed to be taped directly next to the box and in the right orientation  
(just use the magnets in the door you want to keep open to find the orientation and position needed - if the magnets snap to the door magnets they are in the right polarity)

---

_[View the full topic](https://forum.snapmaker.com/t/laser-not-coming-on-when-setting-origin-after-firmware-update/29937)._
