# Laser Job Stops Repeating error in console

**URL:** <https://forum.snapmaker.com/t/laser-job-stops-repeating-error-in-console/34233>\
**Category:** Artisan (3-in-1)\
**Tags:** Gcode, Laser\
**Created:** [December 23, 2023, 3:20am UTC](https://forum.snapmaker.com/t/laser-job-stops-repeating-error-in-console/34233 "2023-12-23T03:20:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![scetron](https://avatars.discourse-cdn.com/v4/letter/s/6f9a4e/32.png) [@scetron](https://forum.snapmaker.com/u/scetron)\
**Post date:** [December 23, 2023, 3:20am UTC](https://forum.snapmaker.com/t/laser-job-stops-repeating-error-in-console/34233/1 "2023-12-23T03:20:14Z")

</div>

Hello!

I have a long job that stop nearly at the end of the longest step. To troubleshoot, I attached to the console and I see a repeating error message:

```auto
others < Origin offset A: 0.000
echo:Unknown command: "M1010"
echo:Unknown command: "M1012"
others < Origin offset A: 0.000
echo:Unknown command: "M1010"
echo:Unknown command: "M1012"
others < Origin offset A: 0.000
echo:Unknown command: "M1010"
echo:Unknown command: "M1012"
others < Origin offset A: 0.000
echo:Unknown command: "M1010"
echo:Unknown command: "M1012"

```

I would like to restart the job, but I have paused and unpaused, n’either of which have done anything.

Any further information would be great!

---

<div class="post-metadata">

**Author:** ![Zoe](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/zoe/32/26962_2.png) [@Zoe](https://forum.snapmaker.com/u/Zoe)\
**Post date:** [December 26, 2023, 7:26am UTC](https://forum.snapmaker.com/t/laser-job-stops-repeating-error-in-console/34233/2 "2023-12-26T07:26:07Z")

</div>

@scetron Sorry to hear that. You can submit a ticket to the support team for help at: [Support Ticket Form](https://snapmaker.formcrafts.com/support-ticket)