# Laser inline power

**URL:** <https://forum.snapmaker.com/t/laser-inline-power/30274>\
**Category:** Snapmaker Luban\
**Created:** [March 15, 2023, 10:09pm UTC](https://forum.snapmaker.com/t/laser-inline-power/30274 "2023-03-15T22:09:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jasonlap64](https://avatars.discourse-cdn.com/v4/letter/j/b5ac83/32.png) [@jasonlap64](https://forum.snapmaker.com/u/jasonlap64)\
**Post date:** [March 15, 2023, 10:09pm UTC](https://forum.snapmaker.com/t/laser-inline-power/30274/1 "2023-03-15T22:09:11Z")

</div>

Is the inline power feature that was added to the firmware utilized in Luban?

---

<div class="post-metadata">

**Author:** ![Hauke](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/hauke/32/5704_2.png) [@Hauke](https://forum.snapmaker.com/u/Hauke)\
**Post date:** [March 16, 2023, 9:56am UTC](https://forum.snapmaker.com/t/laser-inline-power/30274/2 "2023-03-16T09:56:44Z")

</div>

I stand to be corrected, but I understand that inline power is not anything the Slicer/GCode-Generator needs to take into account. The firmware will adjust the laser power to match the current acceleration status/speed of the toolhead, so that the laser power remains uniform during accel, move, and deccel. The GCode will just say: Move from A to B with Power X, and the inline power will make sure that X is true along the complete path.  
But I may have misunderstood this completely…