# Laser Frustrations and bugs

**URL:** <https://forum.snapmaker.com/t/laser-frustrations-and-bugs/39366>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [May 3, 2025, 4:58pm UTC](https://forum.snapmaker.com/t/laser-frustrations-and-bugs/39366 "2025-05-03T16:58:37Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![Hauke](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/hauke/32/5704_2.png) [@Hauke](https://forum.snapmaker.com/u/Hauke)\
**Post date:** [May 15, 2025, 8:58pm UTC](https://forum.snapmaker.com/t/laser-frustrations-and-bugs/39366/11 "2025-05-15T20:58:06Z")

</div>

MAN!  
This device is driving me _crazy_!!!

Now that I finally understood what others grasped much faster than me, i.e. that M3 is constant power, M4 is adaptive power, and that inline has no immediate connection to it, I thought I’m ready for repeating my experiments with the 2W IR laser on black acrylic and PCB etching. So I wanted to see if I could get true greyscale, repeating [this experiment](https://forum.snapmaker.com/t/laser-inline-power-processing-slow/38563/3). Results were confusing, so I went back to systematic tests. Ran a test pattern - was rather surprised! See yourself:

Top row is constant power mode ON, bottom row has it OFF (Was running out of space, so had to squeeze the top row in)

 ![grafik](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/f/5/f54d934c4ed4c34f9d294acce25f2ce96d1366d3.jpeg)

This is test patterns done with Luban, **not** Lightburn. Looked into the GCode, and it is perfectly sane, the power settings should do 2,4,6,…,20% in both cases. But with constant power OFF, there’s obviously no proper power regulation.

I remembered [this post](https://forum.snapmaker.com/t/laser-inline-power-processing-slow/38563/13) by @Skreelink where he had it that trapezoid power seemed to be inverted - this I could not reproduce. Any square I created, be it with Luban or Lightburn, was behaving well.

Still, something is very odd with the adative power control of the 2W… And I was so happy that with the blue lasers it finally was all understood and working _sigh_

I’m back to really frustrated…

EDIT: Here’s the GCode if you want to peek into it yourself. I actually used the bottom two for the photo above.

[TestPatternConstantPowerON.nc](https://forum.snapmaker.com/uploads/short-url/8gcdk02lk0VikIU5Equ83TlYDnr.nc) (119.6 KB)  
[TestPatternConstantPowerOFF.nc](https://forum.snapmaker.com/uploads/short-url/tMzrWHSAFOgRKANGf0kSngDPJQY.nc) (119.6 KB)  
[TestPatternConstantPowerON-TextRemoved.nc](https://forum.snapmaker.com/uploads/short-url/hUIn4l2QDMn9B5I1O0D7y2rNKy3.nc) (45.5 KB)

---

_[View the full topic](https://forum.snapmaker.com/t/laser-frustrations-and-bugs/39366)._
