# Laser Focus Failing Since Update 4.1.2?

**URL:** <https://forum.snapmaker.com/t/laser-focus-failing-since-update-4-1-2/22830>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [December 21, 2021, 6:36am UTC](https://forum.snapmaker.com/t/laser-focus-failing-since-update-4-1-2/22830 "2021-12-21T06:36:19Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![jbohbot](https://avatars.discourse-cdn.com/v4/letter/j/f05b48/32.png) [@jbohbot](https://forum.snapmaker.com/u/jbohbot)\
**Post date:** [December 21, 2021, 11:11pm UTC](https://forum.snapmaker.com/t/laser-focus-failing-since-update-4-1-2/22830/6 "2021-12-21T23:11:20Z")

</div>

I cannot get my 1600 laser to engrave / cut ANYTHING anymore. Since the last 2 firmware upgrades nothing works. The auto focus will “attempt” to make lines then take a photo of the blank it left behind and then fail. The manual focus works, but when I send it a job, its shooting blanks again. This is a disgrace! I REALLY hope they are not trying to force us to buy the 10W laser.

I’m just REALLY glad I made all my ornaments before this stupid update.

---

_[View the full topic](https://forum.snapmaker.com/t/laser-focus-failing-since-update-4-1-2/22830)._
