# Laser Engraving Hockey Pucks

**URL:** <https://forum.snapmaker.com/t/laser-engraving-hockey-pucks/15646>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [February 8, 2021, 9:12pm UTC](https://forum.snapmaker.com/t/laser-engraving-hockey-pucks/15646 "2021-02-08T21:12:59Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![accupub](https://avatars.discourse-cdn.com/v4/letter/a/85e7bf/32.png) [@accupub](https://forum.snapmaker.com/u/accupub)\
**Post date:** [February 8, 2021, 9:12pm UTC](https://forum.snapmaker.com/t/laser-engraving-hockey-pucks/15646/1 "2021-02-08T21:12:59Z")

</div>

Has anyone tried laser engraving a hockey puck with the 2.0? If so, what settings did you use?

---

<div class="post-metadata">

**Author:** ![Spoofdogg](https://avatars.discourse-cdn.com/v4/letter/s/ac91a4/32.png) [@Spoofdogg](https://forum.snapmaker.com/u/Spoofdogg)\
**Post date:** [January 25, 2022, 2:25am UTC](https://forum.snapmaker.com/t/laser-engraving-hockey-pucks/15646/2 "2022-01-25T02:25:02Z")

</div>

I’m currently working on this. I’ll post back with an update.

---

<div class="post-metadata">

**Author:** ![Yenick1](https://avatars.discourse-cdn.com/v4/letter/y/977dab/32.png) [@Yenick1](https://forum.snapmaker.com/u/Yenick1)\
**Post date:** [February 15, 2022, 12:53am UTC](https://forum.snapmaker.com/t/laser-engraving-hockey-pucks/15646/3 "2022-02-15T00:53:08Z")

</div>

Any update? Did it work and what settings were used?