# Laser clean recommendations

**URL:** <https://forum.snapmaker.com/t/laser-clean-recommendations/13017>\
**Category:** Snapmaker2.0 Troubleshooting guides\
**Created:** [December 20, 2020, 6:52pm UTC](https://forum.snapmaker.com/t/laser-clean-recommendations/13017 "2020-12-20T18:52:28Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Vndrpttn](https://avatars.discourse-cdn.com/v4/letter/v/71c47a/32.png) [@Vndrpttn](https://forum.snapmaker.com/u/Vndrpttn)\
**Post date:** [December 20, 2020, 6:52pm UTC](https://forum.snapmaker.com/t/laser-clean-recommendations/13017/1 "2020-12-20T18:52:28Z")

</div>

Does anyone know the proper way on to clean the laser? Is disassembly required?

---

<div class="post-metadata">

**Author:** ![brent113](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/brent113/32/11114_2.png) [@brent113](https://forum.snapmaker.com/u/brent113)\
**Post date:** [December 20, 2020, 7:55pm UTC](https://forum.snapmaker.com/t/laser-clean-recommendations/13017/2 "2020-12-20T19:55:45Z")

</div>

I’m not an expert on this, but I was planning on using a pre-moistened lens wipe.

---

<div class="post-metadata">

**Author:** ![Vndrpttn](https://avatars.discourse-cdn.com/v4/letter/v/71c47a/32.png) [@Vndrpttn](https://forum.snapmaker.com/u/Vndrpttn)\
**Post date:** [December 20, 2020, 8:14pm UTC](https://forum.snapmaker.com/t/laser-clean-recommendations/13017/3 "2020-12-20T20:14:08Z")

</div>

But I think the lens is pretty deep into the module. I unscrewed that black thing and still can’t reach the lens with a wipe.

---

<div class="post-metadata">

**Author:** ![brent113](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/brent113/32/11114_2.png) [@brent113](https://forum.snapmaker.com/u/brent113)\
**Post date:** [December 20, 2020, 8:17pm UTC](https://forum.snapmaker.com/t/laser-clean-recommendations/13017/4 "2020-12-20T20:17:01Z")

</div>

Use a q tip with the cleaning wipe on the end?

---

<div class="post-metadata">

**Author:** ![Vndrpttn](https://avatars.discourse-cdn.com/v4/letter/v/71c47a/32.png) [@Vndrpttn](https://forum.snapmaker.com/u/Vndrpttn)\
**Post date:** [December 20, 2020, 8:28pm UTC](https://forum.snapmaker.com/t/laser-clean-recommendations/13017/5 "2020-12-20T20:28:52Z")

</div>

That’s a good idea - think I’ll give that a try. Thanks