# J1 non stop clicking, under extrusion and filament load fail **URL:** \ **Category:** J1/J1s IDEX\ **Created:** [January 10, 2023, 4:20am UTC](https://forum.snapmaker.com/t/j1-non-stop-clicking-under-extrusion-and-filament-load-fail/28902 "2023-01-10T04:20:57Z")\ **Posts on this page:** 1\ **Showing post:** 26
**Author:** ![i3sven](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/i3sven/32/20686_2.png) [@i3sven](https://forum.snapmaker.com/u/i3sven)\ **Post date:** [February 7, 2023, 5:42pm UTC](https://forum.snapmaker.com/t/j1-non-stop-clicking-under-extrusion-and-filament-load-fail/28902/26 "2023-02-07T17:42:53Z")
Bei Interesse, eventuell hilft das… > [@Constant extruder skips/clog warnings](https://forum.snapmaker.com/t/constant-extruder-skips-clog-warnings/28668/65): > > i have the same problem with the snapmaker artisan! I’ve already disassembled and cleaned the whole nozzle and then it works for 2 hours and then the error comes back. the filament gears are under-tensioned. this plastic construction is flawed. with 2.0 it was solved better. If you are interested, this might help… > [@Constant extruder skips/clog warnings](https://forum.snapmaker.com/t/constant-extruder-skips-clog-warnings/28668/65): > > i have the same problem with the snapmaker artisan! I’ve already disassembled and cleaned the whole nozzle and then it works for 2 hours and then the error comes back. the filament gears are under-tensioned. this plastic construction is flawed. with 2.0 it was solved better. --- _[View the full topic](https://forum.snapmaker.com/t/j1-non-stop-clicking-under-extrusion-and-filament-load-fail/28902)._