# Is there a way to control laser height while it engraves? **URL:** \ **Category:** Snapmaker 2.0 (3-in-1)\ **Created:** [January 29, 2023, 10:31am UTC](https://forum.snapmaker.com/t/is-there-a-way-to-control-laser-height-while-it-engraves/29382 "2023-01-29T10:31:29Z")\ **Posts on this page:** 1\ **Showing post:** 15
**Author:** ![nweolu](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/nweolu/32/23079_2.png) [@nweolu](https://forum.snapmaker.com/u/nweolu)\ **Post date:** [October 29, 2023, 1:38am UTC](https://forum.snapmaker.com/t/is-there-a-way-to-control-laser-height-while-it-engraves/29382/15 "2023-10-29T01:38:23Z")
> [@Guide for Non-Planar Laser Engraving](https://forum.snapmaker.com/t/guide-for-non-planar-laser-engraving/25120): > > Sorry for taking so long to get this out, but here’s a guide following how I did the non-planar engraving examples. NOTE: This is not completely comprehensive, I’m sure there’s several ways to do this, including custom post-processors, custom tools etc. This is just the method I used and the examples within are very simple, more complex use cases can be done and may require tricks not outlined here. First off, I’m not great at Fusion360 yet, my job doesn’t afford me too much time to just sit a… --- _[View the full topic](https://forum.snapmaker.com/t/is-there-a-way-to-control-laser-height-while-it-engraves/29382)._