# "Internal Bridge Density" for a good bridge

**URL:** <https://forum.snapmaker.com/t/internal-bridge-density-for-a-good-bridge/43580>\
**Category:** Feature Requests\
**Tags:** Orcaslicer\
**Created:** [October 8, 2026, 1:49pm UTC](https://forum.snapmaker.com/t/internal-bridge-density-for-a-good-bridge/43580 "2026-10-08T13:49:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![lucian](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/lucian/32/36634_2.png) [@lucian](https://forum.snapmaker.com/u/lucian)\
**Post date:** [October 8, 2026, 1:49pm UTC](https://forum.snapmaker.com/t/internal-bridge-density-for-a-good-bridge/43580/1 "2026-10-08T13:49:15Z")

</div>

Could you please unlock the option for internal bridge density so that you can set it to more than 100%. The Orca Slicer team understood the importance of this option for printing bridges and removed the 100% limit. There is a connection between flow ratio and bridge density to be able to print a perfect bridge.

It’s too much to explain but if anyone is curious they can follow the link below on YouTube

[https://www.youtube.com/watch?v=Mrs2kAuRCBk&list=PLVy7LBPEBJs0&index=23](https://www.youtube.com/watch?v=Mrs2kAuRCBk&list=PLVy7LBPEBJs0&index=23)

Thank you

---

<div class="post-metadata">

**Author:** ![CrazyIvan](https://avatars.discourse-cdn.com/v4/letter/c/7bcc69/32.png) [@CrazyIvan](https://forum.snapmaker.com/u/CrazyIvan)\
**Post date:** [October 8, 2026, 2:02pm UTC](https://forum.snapmaker.com/t/internal-bridge-density-for-a-good-bridge/43580/2 "2026-10-08T14:02:23Z")

</div>

I’ve added the “Orcaslicer” tag to this post.