# Initial setup - rear machine clearance

**URL:** <https://forum.snapmaker.com/t/initial-setup-rear-machine-clearance/13353>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [December 26, 2020, 4:43pm UTC](https://forum.snapmaker.com/t/initial-setup-rear-machine-clearance/13353 "2020-12-26T16:43:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ShuggyP](https://avatars.discourse-cdn.com/v4/letter/s/3d9bf3/32.png) [@ShuggyP](https://forum.snapmaker.com/u/ShuggyP)\
**Post date:** [December 26, 2020, 4:43pm UTC](https://forum.snapmaker.com/t/initial-setup-rear-machine-clearance/13353/1 "2020-12-26T16:43:21Z")

</div>

Hi folks, I am just about to unbox and set up my A350 and can find no mention, in the quick start guide, of how far from the wall or back-board the machine needs to be to avoid the bed from hitting the wall when it moves backwards. Can anyone help with this information please?  
Merry Christmas and thanks in advance.

---

<div class="post-metadata">

**Author:** ![brent113](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/brent113/32/11114_2.png) [@brent113](https://forum.snapmaker.com/u/brent113)\
**Post date:** [December 26, 2020, 7:33pm UTC](https://forum.snapmaker.com/t/initial-setup-rear-machine-clearance/13353/2 "2020-12-26T19:33:32Z")

</div>

Here’s the dimension of the enclosure which includes front and back clearance. you can measure off the wall this total distance and then stick the machine in the middle

> [@SnapMaker 2.0 Enclosure](https://forum.snapmaker.com/t/snapmaker-2-0-enclosure/4940/8):
>
> Yes we will switch to the description of width, depth and height for the enclosure soon. Here is the new size description of the enclosures in metric: A350 (W x D x H): 625mm x 820mm x 602mm; 20kg A250 (W x D x H): 531mm x 624mm x 507mm; 15kg A150 (W x D x H): 398mm x 423mm x 407mm; 10kg

---

<div class="post-metadata">

**Author:** ![ShuggyP](https://avatars.discourse-cdn.com/v4/letter/s/3d9bf3/32.png) [@ShuggyP](https://forum.snapmaker.com/u/ShuggyP)\
**Post date:** [December 26, 2020, 8:25pm UTC](https://forum.snapmaker.com/t/initial-setup-rear-machine-clearance/13353/3 "2020-12-26T20:25:10Z")

</div>

Thanks Brent, that’s really helpful! Much obliged 😁🎄
