# Inconsistent Layerlines

**URL:** <https://forum.snapmaker.com/t/inconsistent-layerlines/38396>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [December 10, 2024, 10:55pm UTC](https://forum.snapmaker.com/t/inconsistent-layerlines/38396 "2024-12-10T22:55:01Z")\
**Posts on this page:** 1\
**Showing post:** 39

<div class="post-metadata">

**Author:** ![Blackavid](https://avatars.discourse-cdn.com/v4/letter/b/35a633/32.png) [@Blackavid](https://forum.snapmaker.com/u/Blackavid)\
**Post date:** [January 17, 2025, 11:19am UTC](https://forum.snapmaker.com/t/inconsistent-layerlines/38396/39 "2025-01-17T11:19:39Z")

</div>

Hi Hauke!  
Thanks for this feedback- I think we found the solution to my problem

You can’t really see the wear when its inside the print head but today I dissembled it to check if it can be tightened.

I realized my extruder gear does show some wear and that could be the issue why I sometimes may get minor slip and also be the reason why my E steps are that high at 260  
The problem is that I can’t change this gear or I don’t know how.

 ![IMG_2450](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/5/8/587eab22e51ed4c711fa3354a325c0613818eead.jpeg)  
 ![IMG_2451](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/3/c/3ced39f456c5984dd9f9af57379edca835525fb3.jpeg)

---

_[View the full topic](https://forum.snapmaker.com/t/inconsistent-layerlines/38396)._