# I built an Android workflow for finding, slicing and sending models to Snapmaker printers — looking for testers

**URL:** <https://forum.snapmaker.com/t/i-built-an-android-workflow-for-finding-slicing-and-sending-models-to-snapmaker-printers-looking-for-testers/43377>\
**Category:** Mods & Builds\
**Created:** [September 14, 2026, 2:37pm UTC](https://forum.snapmaker.com/t/i-built-an-android-workflow-for-finding-slicing-and-sending-models-to-snapmaker-printers-looking-for-testers/43377 "2026-09-14T14:37:56Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mr\_Aydemir](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/mr_aydemir/32/35791_2.png) [@Mr\_Aydemir](https://forum.snapmaker.com/u/Mr_Aydemir)\
**Post date:** [September 14, 2026, 2:37pm UTC](https://forum.snapmaker.com/t/i-built-an-android-workflow-for-finding-slicing-and-sending-models-to-snapmaker-printers-looking-for-testers/43377/1 "2026-09-14T14:37:56Z")

</div>

Hi everyone,

I’m the independent developer of MakerSpell, an Android app that combines multi-platform model discovery, local Orca-based slicing and network printer control in one mobile workflow.

I have been testing it with my Snapmaker U1: open a model, prepare and slice it directly on Android, then send the resulting G-code to the printer.

I currently test with a Snapmaker U1, but feedback from other Snapmaker models is welcome. Available features may vary by model and firmware.

MakerSpell is not affiliated with or endorsed by Snapmaker. It is currently in open testing, and compatibility may vary by firmware and configuration. I’m looking for honest, reproducible feedback from other U1 owners.

If you test it, please share:

- Your U1 firmware version
- Which part of the workflow you tested
- Whether slicing, upload and monitoring worked
- The exact error or request ID if something failed

Google Play open test:

> <https://play.google.com/store/apps/details?id=com.makerspell.app>
>
> Search 20+ model sites, slice on-device, manage printers and publish products...

Thank you!

---

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [September 14, 2026, 5:46pm UTC](https://forum.snapmaker.com/t/i-built-an-android-workflow-for-finding-slicing-and-sending-models-to-snapmaker-printers-looking-for-testers/43377/2 "2026-09-14T17:46:15Z")

</div>

Thanks for sharing.  
Unfortunately no U1 User here 😉

---

<div class="post-metadata">

**Author:** ![Mr\_Aydemir](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/mr_aydemir/32/35791_2.png) [@Mr\_Aydemir](https://forum.snapmaker.com/u/Mr_Aydemir)\
**Post date:** [September 14, 2026, 6:32pm UTC](https://forum.snapmaker.com/t/i-built-an-android-workflow-for-finding-slicing-and-sending-models-to-snapmaker-printers-looking-for-testers/43377/3 "2026-09-14T18:32:18Z")

</div>

No worries, and thanks for checking it out! U1 is simply the Snapmaker printer I currently have available for testing—the app is not intended to be limited to U1. I’d also be interested in feedback from owners of other Snapmaker models, especially regarding discovery, monitoring and G-code transfer. Which Snapmaker model do you use?

---

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [September 15, 2026, 5:42pm UTC](https://forum.snapmaker.com/t/i-built-an-android-workflow-for-finding-slicing-and-sending-models-to-snapmaker-printers-looking-for-testers/43377/4 "2026-09-15T17:42:25Z")

</div>

Thanks for reaching out, 2.0 user here 🥳

---

<div class="post-metadata">

**Author:** ![Mr\_Aydemir](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/mr_aydemir/32/35791_2.png) [@Mr\_Aydemir](https://forum.snapmaker.com/u/Mr_Aydemir)\
**Post date:** [September 15, 2026, 6:46pm UTC](https://forum.snapmaker.com/t/i-built-an-android-workflow-for-finding-slicing-and-sending-models-to-snapmaker-printers-looking-for-testers/43377/5 "2026-09-15T18:46:28Z")

</div>

That’s great to hear, thanks! 2.0 feedback is very valuable since I only have a U1 here for hands-on testing.  
Could you share your exact 2.0 model / enclosure / firmware? And if you get a chance to try it, I’m most curious about:

- printer discovery over LAN
- G-code upload + print start
- monitoring / camera if you use it  
Anything reproducible with firmware version + request ID helps a lot. Thanks again for jumping in!

If a feature isn’t supported on 2.0, the app should show it as unavailable instead of failing — please tell me if it does the opposite somewhere.

---

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [September 16, 2026, 6:00pm UTC](https://forum.snapmaker.com/t/i-built-an-android-workflow-for-finding-slicing-and-sending-models-to-snapmaker-printers-looking-for-testers/43377/6 "2026-09-16T18:00:09Z")

</div>

This is no Moonraker kompatible machine. So I guess the connection could not work. I’m out here, seems for me too much ki spit, sry.
