# How to pause 3D print AND get printer head to go quiet

**URL:** <https://forum.snapmaker.com/t/how-to-pause-3d-print-and-get-printer-head-to-go-quiet/18528>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [May 9, 2021, 11:59pm UTC](https://forum.snapmaker.com/t/how-to-pause-3d-print-and-get-printer-head-to-go-quiet/18528 "2021-05-09T23:59:00Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Edwin](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/edwin/32/13481_2.png) [@Edwin](https://forum.snapmaker.com/u/Edwin)\
**Post date:** [May 10, 2021, 6:51am UTC](https://forum.snapmaker.com/t/how-to-pause-3d-print-and-get-printer-head-to-go-quiet/18528/2 "2021-05-10T06:51:26Z")

</div>

Command `M2001` will help you out.

> [@New Commands](https://forum.snapmaker.com/t/new-commands/17494):
>
> [GitHub Request](https://github.com/Snapmaker/Snapmaker2-Controller/pull/47) Command Syntax: M2001 S{0} T{0} B{0} S: Screen power domain T: Toolhead / linear module power domain B: Bed / addon power domain Example usage of this command: M2001 T0 ; Disable toolhead / linear module power M2001 T ; Enable toolhead / linear module power, automatically reboots the screen and main controller M2001 S T B ; Enable all domains, rebooting if T or B was OFF previously

---

_[View the full topic](https://forum.snapmaker.com/t/how-to-pause-3d-print-and-get-printer-head-to-go-quiet/18528)._