# How to factory reset my device?

**URL:** <https://forum.snapmaker.com/t/how-to-factory-reset-my-device/5340>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [February 18, 2020, 2:48pm UTC](https://forum.snapmaker.com/t/how-to-factory-reset-my-device/5340 "2020-02-18T14:48:15Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Tone](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/tone/32/1278_2.png) [@Tone](https://forum.snapmaker.com/u/Tone)\
**Post date:** [February 18, 2020, 8:18pm UTC](https://forum.snapmaker.com/t/how-to-factory-reset-my-device/5340/4 "2020-02-18T20:18:36Z")

</div>

This was posted on Facebook, I haven’t tried it:

- Connect your computer to your snapmaker with the mini USB cable
- Open the snapmaker luban software and connect to the snapmaker through serial.
- Type in M502, then press enter (this resets the printer to factory default)
- Type M206 X-17 Y-8, then press enter (this sets the homing offset)
- Type M500, then press enter (this will save the new settings)

---

_[View the full topic](https://forum.snapmaker.com/t/how-to-factory-reset-my-device/5340)._