# Hi all! New user waiting for A150 **URL:** \ **Category:** Snapmaker 2.0 (3-in-1)\ **Created:** [October 6, 2020, 1:59pm UTC](https://forum.snapmaker.com/t/hi-all-new-user-waiting-for-a150/10176 "2020-10-06T13:59:17Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![AirMonk](https://avatars.discourse-cdn.com/v4/letter/a/87869e/32.png) [@AirMonk](https://forum.snapmaker.com/u/AirMonk)\ **Post date:** [October 6, 2020, 1:59pm UTC](https://forum.snapmaker.com/t/hi-all-new-user-waiting-for-a150/10176/1 "2020-10-06T13:59:18Z")
Hi guys, I’m new in the forum and I’m waiting for my pre-ordered SM 2 (A150): it should be here in Italy on November… just cross my finger and say hello to the community! 🙂 ---
**Author:** ![Streupfeffer](https://avatars.discourse-cdn.com/v4/letter/s/f9ae1b/32.png) [@Streupfeffer](https://forum.snapmaker.com/u/Streupfeffer)\ **Post date:** [October 6, 2020, 2:18pm UTC](https://forum.snapmaker.com/t/hi-all-new-user-waiting-for-a150/10176/2 "2020-10-06T14:18:44Z")
Welcome to the maker community. Feel free to ask questions and participate in the Forum. ---
**Author:** ![brent113](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/brent113/32/11114_2.png) [@brent113](https://forum.snapmaker.com/u/brent113)\ **Post date:** [October 6, 2020, 2:28pm UTC](https://forum.snapmaker.com/t/hi-all-new-user-waiting-for-a150/10176/3 "2020-10-06T14:28:52Z")
Welcome! First 3d printer for you? Upgrading from something else? ---
**Author:** ![AirMonk](https://avatars.discourse-cdn.com/v4/letter/a/87869e/32.png) [@AirMonk](https://forum.snapmaker.com/u/AirMonk)\ **Post date:** [October 6, 2020, 2:31pm UTC](https://forum.snapmaker.com/t/hi-all-new-user-waiting-for-a150/10176/4 "2020-10-06T14:31:15Z")
First 3D printer! For sure I’ll have lot of questions… hope you will be patient with me! 🙂 I’m also very interested on CNC (I’m studying Fusion 360) and hope to be able to do some little PCB too ---
**Author:** ![brent113](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/brent113/32/11114_2.png) [@brent113](https://forum.snapmaker.com/u/brent113)\ **Post date:** [October 6, 2020, 2:38pm UTC](https://forum.snapmaker.com/t/hi-all-new-user-waiting-for-a150/10176/5 "2020-10-06T14:38:35Z")
Sound very similar to why I got it. I make PCBs, and the process I have now is not really enjoyable - hoping the CNC PCB functions will be better. Just setting the stage a bit for expectations for you - glad to hear you’re learning F360 - I’m learning it too, it’s great software. Don’t plan on the included software (Luban) being particularly useful, most people get the greatest success by using it as a machine control interface, and not as a 3D slicer as it’s a simplified version of the already free Cura - at least use that instead. Plan on going slow and doing lots of calibration cubes and other tests to get a feel for the machine. Some people have had great success out of the box, some people (myself included) needed to tweak the parameters quite a bit to get it successful. Check out my calibration steps here for 3D printing: [Snapmaker 2.0 Initial Calibration Settings / Experiences](https://forum.snapmaker.com/t/snapmaker-2-0-initial-calibration-settings-experiences/9928). ---
**Author:** ![AirMonk](https://avatars.discourse-cdn.com/v4/letter/a/87869e/32.png) [@AirMonk](https://forum.snapmaker.com/u/AirMonk)\ **Post date:** [October 6, 2020, 2:40pm UTC](https://forum.snapmaker.com/t/hi-all-new-user-waiting-for-a150/10176/6 "2020-10-06T14:40:40Z")
Thank you so much brent113!