# Having Problem with the Z Axis after calibrating

**URL:** <https://forum.snapmaker.com/t/having-problem-with-the-z-axis-after-calibrating/27499>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [October 7, 2022, 5:41pm UTC](https://forum.snapmaker.com/t/having-problem-with-the-z-axis-after-calibrating/27499 "2022-10-07T17:41:12Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cadprof](https://avatars.discourse-cdn.com/v4/letter/c/50afbb/32.png) [@Cadprof](https://forum.snapmaker.com/u/Cadprof)\
**Post date:** [October 7, 2022, 5:41pm UTC](https://forum.snapmaker.com/t/having-problem-with-the-z-axis-after-calibrating/27499/1 "2022-10-07T17:41:12Z")

</div>

After I calibrate the “Z” aixs using the autoleveling technique and saving it, when I go to print, everything looks fine except when it moves into position to print, the “Z” axis is about 2-3mm above the bed. I’ve tried re-calibrating several times to no avail. I’m currently using Luban version 4.1.1. Is the newest release of Luban stable? Might this fix the problem? Any help/ideas would be appreciated. BTW, this problem just started. Machine worked fine on the last print, about a month ago.

---

<div class="post-metadata">

**Author:** ![Cadprof](https://avatars.discourse-cdn.com/v4/letter/c/50afbb/32.png) [@Cadprof](https://forum.snapmaker.com/u/Cadprof)\
**Post date:** [October 7, 2022, 8:30pm UTC](https://forum.snapmaker.com/t/having-problem-with-the-z-axis-after-calibrating/27499/2 "2022-10-07T20:30:40Z")

</div>

I found the problem, it was operator error. I forgot to place a period (.) in front of my setting…Duh