# Hardware Replacement Parts

**URL:** <https://forum.snapmaker.com/t/hardware-replacement-parts/2456>\
**Category:** Original (3-in-1)\
**Created:** [April 16, 2018, 5:48pm UTC](https://forum.snapmaker.com/t/hardware-replacement-parts/2456 "2018-04-16T17:48:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JediDisciple](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/jedidisciple/32/1183_2.png) [@JediDisciple](https://forum.snapmaker.com/u/JediDisciple)\
**Post date:** [April 16, 2018, 5:48pm UTC](https://forum.snapmaker.com/t/hardware-replacement-parts/2456/1 "2018-04-16T17:48:55Z")

</div>

Does anyone have a line on where or how to purchase replacement parts for the Snapmaker?

I’m specifically looking to buy a couple of extra 3D print nozzles. I just swapped out the original nozzle and now don’t have a spare. BTW - if you’re experiencing rough or dodgy 3D printing, try switching out the 3D print nozzle (see here - [https://manual.snapmaker.com/3d\_printing/faq/what-should-i-do-when-the-nozzle-is-jammed.html](https://manual.snapmaker.com/3d_printing/faq/what-should-i-do-when-the-nozzle-is-jammed.html)). My prints are amazing since swapping out the nozzle. I’m going to attempt to clean the original nozzle, but it’s going to be tough to get it back close to clean/new.

Kudos to Snapmaker for providing a spare. Well played.

---

<div class="post-metadata">

**Author:** ![rojaljelly](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/rojaljelly/32/739_2.png) [@rojaljelly](https://forum.snapmaker.com/u/rojaljelly)\
**Post date:** [April 16, 2018, 6:45pm UTC](https://forum.snapmaker.com/t/hardware-replacement-parts/2456/2 "2018-04-16T18:45:42Z")

</div>

I’ve printed with my nozzle about 3 kg filament (mostly PET-G) with no problems at all keeping the nozzle clean. Scrape down the molten/burnt filament with the tweezers when the nozzle is still hot.

But I’m pretty sure you can use standard nozzles from Amazon or somwhere else.

---

<div class="post-metadata">

**Author:** ![robertgoodwyne](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/robertgoodwyne/32/1570_2.png) [@robertgoodwyne](https://forum.snapmaker.com/u/robertgoodwyne)\
**Post date:** [April 20, 2018, 5:39am UTC](https://forum.snapmaker.com/t/hardware-replacement-parts/2456/3 "2018-04-20T05:39:17Z")

</div>

i too would like to order replacement and new parts for my snapmaker. when will the website be launched so we can order parts?