# Hand controller not moving x or y **URL:** \ **Category:** Showcase & Prints\ **Created:** [November 27, 2022, 10:04pm UTC](https://forum.snapmaker.com/t/hand-controller-not-moving-x-or-y/28051 "2022-11-27T22:04:18Z")\ **Posts on this page:** 1\ **Showing post:** 13
**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\ **Post date:** [November 30, 2022, 7:06pm UTC](https://forum.snapmaker.com/t/hand-controller-not-moving-x-or-y/28051/13 "2022-11-30T19:06:23Z")
Please make a photo of your homescreen, like it is after power up. Afterwards power it off and try it again with no toolhead connected and see if you could move. Here is the source for firmware downloads: > [@Snapmaker 2.0 Firmware Updates and Downloads](https://forum.snapmaker.com/t/snapmaker-2-0-firmware-updates-and-downloads/5443): > > We will release the latest Snapmaker 2.0 firmware updates and downloads under this topic. Your feedback is very much appreciated. You can report any bugs or make any suggestions in the [discussion thread.](https://forum.snapmaker.com/t/discussion-of-snapmaker-2-0-firmware-updates/5441) Snapmaker 2.0 Firmware Version List Latest Version: [Snapmaker2\_V1.18.1](https://s3-us-west-2.amazonaws.com/snapmaker.com/download/firmware/Snapmaker2_V1.18.1.bin)[History Version 30(Oct. 25, 2023): V1.18.0](https://s3-us-west-2.amazonaws.com/snapmaker.com/download/firmware/Snapmaker2_V1.18.0.bin)[History Version 29(Sept. 5, 2023): V1.17.7](https://s3-us-west-2.amazonaws.com/snapmaker.com/download/firmware/Snapmaker2_V1.17.17.bin)[History Version 28(Jul. 27, 2023): V1.16.7](https://s3-us-west-2.amazonaws.com/snapmaker.com/download/firmware/Snapmaker2_V1.16.7.bin)[History Version 27(Jul. 14, 2023): V1.16.5](https://s3-us-west-2.amazonaws.com/snapmaker.com/download/firmware/Snapmaker2_V1.16.5.bin)[History Version 26(May. 19, 2023): V1.15.26](https://s3-us-west-2.amazonaws.com/snapmaker.com/download/firmware/Snapmaker2_V1.15.26.bin) … --- _[View the full topic](https://forum.snapmaker.com/t/hand-controller-not-moving-x-or-y/28051)._