# Guide to connect Snapmaker 2.0 A350 to Palette 3 Pro/Canvas

**URL:** <https://forum.snapmaker.com/t/guide-to-connect-snapmaker-2-0-a350-to-palette-3-pro-canvas/22822>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [December 20, 2021, 9:08pm UTC](https://forum.snapmaker.com/t/guide-to-connect-snapmaker-2-0-a350-to-palette-3-pro-canvas/22822 "2021-12-20T21:08:20Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Deadpolk](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/deadpolk/32/9409_2.png) [@Deadpolk](https://forum.snapmaker.com/u/Deadpolk)\
**Post date:** [December 20, 2021, 9:08pm UTC](https://forum.snapmaker.com/t/guide-to-connect-snapmaker-2-0-a350-to-palette-3-pro-canvas/22822/1 "2021-12-20T21:08:20Z")

</div>

Has anyone successfully done this, print on A350 through Palette 3 Pro/Canvas3d.io?

If so how?

---

<div class="post-metadata">

**Author:** ![clewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/clewis/32/3255_2.png) [@clewis](https://forum.snapmaker.com/u/clewis)\
**Post date:** [December 20, 2021, 11:52pm UTC](https://forum.snapmaker.com/t/guide-to-connect-snapmaker-2-0-a350-to-palette-3-pro-canvas/22822/2 "2021-12-20T23:52:58Z")

</div>

A user got the [Palette 2 + Octoprint working](https://forum.snapmaker.com/t/snapmaker-2-octoprint-on-docker-via-wifi-palette-2s/9358/13), so I would assume Palette 3 shouldn’t be much more work.

---

<div class="post-metadata">

**Author:** ![Deadpolk](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/deadpolk/32/9409_2.png) [@Deadpolk](https://forum.snapmaker.com/u/Deadpolk)\
**Post date:** [December 22, 2021, 6:49pm UTC](https://forum.snapmaker.com/t/guide-to-connect-snapmaker-2-0-a350-to-palette-3-pro-canvas/22822/4 "2021-12-22T18:49:27Z")

</div>

octoprint doesn’t work with palette 3, they took a proprietary route, much to many peoples dismay

---

<div class="post-metadata">

**Author:** ![CNC-Maker](https://avatars.discourse-cdn.com/v4/letter/c/df788c/32.png) [@CNC-Maker](https://forum.snapmaker.com/u/CNC-Maker)\
**Post date:** [December 23, 2021, 8:10am UTC](https://forum.snapmaker.com/t/guide-to-connect-snapmaker-2-0-a350-to-palette-3-pro-canvas/22822/5 "2021-12-23T08:10:39Z")

</div>

Here are some links that you might be interested in:

> **[Printer Compatibility with Palette](https://support.mosaicmfg.com/Wiki/Printer_Compatibility_with_Palette)**
>
> Please refer to the following table to check your printer's compatibility with Palette 3. Palette has 3 requirements for compatibility: accepts...

> **[Slicer Compatibility with Palette](https://support.mosaicmfg.com/Wiki/Slicer_Compatibility_with_Palette)**
>
> To print with Palette and Chroma, you first use a slicer to create GCode, then you process that GCode in Mosaic's free software. Not all GCode is the same....

Just go through the support pages and you should be able to find all of the information that you need.
