# Guide: Etching Glass with 10 Watt Laser with Dry Moly

**URL:** <https://forum.snapmaker.com/t/guide-etching-glass-with-10-watt-laser-with-dry-moly/33914>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Tags:** Laser\
**Created:** [December 3, 2023, 4:19am UTC](https://forum.snapmaker.com/t/guide-etching-glass-with-10-watt-laser-with-dry-moly/33914 "2023-12-03T04:19:42Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Hauke](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/hauke/32/5704_2.png) [@Hauke](https://forum.snapmaker.com/u/Hauke)\
**Post date:** [December 3, 2023, 7:40pm UTC](https://forum.snapmaker.com/t/guide-etching-glass-with-10-watt-laser-with-dry-moly/33914/2 "2023-12-03T19:40:50Z")

</div>

Just one addition: If you use Lightburn anyhow, I can only recommend to use “Offset Fill” - IMHO the results are clearly better: [Laser engraving glass - tried several methods, here are the results - #31 by Hauke](https://forum.snapmaker.com/t/laser-engraving-glass-tried-several-methods-here-are-the-results/33268/31)

---

_[View the full topic](https://forum.snapmaker.com/t/guide-etching-glass-with-10-watt-laser-with-dry-moly/33914)._