# Great Sharing: Prusaslicer Profiles by Dylan and McGybeer

**URL:** <https://forum.snapmaker.com/t/great-sharing-prusaslicer-profiles-by-dylan-and-mcgybeer/28796>\
**Category:** J1/J1s IDEX\
**Tags:** Slicer\_Profile\
**Created:** [January 5, 2023, 9:40am UTC](https://forum.snapmaker.com/t/great-sharing-prusaslicer-profiles-by-dylan-and-mcgybeer/28796 "2023-01-05T09:40:48Z")\
**Posts on this page:** 1\
**Showing post:** 195

<div class="post-metadata">

**Author:** ![Stelzer](https://avatars.discourse-cdn.com/v4/letter/s/94ad74/32.png) [@Stelzer](https://forum.snapmaker.com/u/Stelzer)\
**Post date:** [May 16, 2024, 2:15pm UTC](https://forum.snapmaker.com/t/great-sharing-prusaslicer-profiles-by-dylan-and-mcgybeer/28796/195 "2024-05-16T14:15:18Z")

</div>

I think im using a older version. Sorry ^.^;

; Model: Snapmaker J1 ({nozzle\_diameter[0]}/{nozzle\_diameter[1]})  
; Update: 20240112  
; Maintained by [GitHub - macdylan/3dp-configs: My 3DP Configs](https://github.com/macdylan/3dp-configs)  
In this version it don’t do a G28 X at the end. Will check out the new version from 20240508

My issue wasn’t a missing G28 X at the start but when the printer starts the print.  
If the left extruder started to print the right extruder wasn’t parked. Now the left extruder couldn’t reach all the way to the right.  
And glancing at your newest start code it don’t do a G28 X before start printing. But i will try it out this evening or tomorrow.

---

_[View the full topic](https://forum.snapmaker.com/t/great-sharing-prusaslicer-profiles-by-dylan-and-mcgybeer/28796)._
