# Gouging print!? **URL:** \ **Category:** Snapmaker 2.0 (3-in-1)\ **Created:** [April 13, 2021, 8:20pm UTC](https://forum.snapmaker.com/t/gouging-print/17853 "2021-04-13T20:20:56Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\ **Post date:** [April 14, 2021, 2:30pm UTC](https://forum.snapmaker.com/t/gouging-print/17853/3 "2021-04-14T14:30:31Z")
This behaviour is because of your bed calibration which is pretty fine at the corner. You will overprint the overextrusion in the next coming layers,- so not a big problem at this point of your print. Did you activate the 5x5 calibration grid in the settings of the touchscreen? If yes, it is possible to dig deep into the machine and gcode world to get rid of it. > [@SM2 Bed Leveling 101](https://forum.snapmaker.com/t/sm2-bed-leveling-101/6146): > > I’ve been working on the problems with SM2’s bed leveling issues for a while now. I’ve created some Google Sheets that can help with the process. The “Introduction” page will give some background. If you have any problems at all, please ask. I’m open to any feedback or suggestions. With the link below you can copy the Sheets to your own Google sheet or do a “File:Download” menu selection to save it to your local machine. Maybe this will only be useful for a short while because Snapmaker will fi… > [@For all who want level on glass](https://forum.snapmaker.com/t/for-all-who-want-level-on-glass/12437): > > Hello Snapmakers, I designd a litte helpertool to do automatic leveling on any surface you want. For myself i use a 3mm glasbed directly on the heatingbed.Works very well!!! Here the Link to thingiverse: Any comments, ideas, questions or refinements are very appreciated. Have Fun Stefix --- _[View the full topic](https://forum.snapmaker.com/t/gouging-print/17853)._