# FYI:Source code of Snapmaker Firmware

**URL:** <https://forum.snapmaker.com/t/fyi-source-code-of-snapmaker-firmware/5680>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [March 25, 2020, 1:58pm UTC](https://forum.snapmaker.com/t/fyi-source-code-of-snapmaker-firmware/5680 "2020-03-25T13:58:33Z")\
**Posts on this page:** 1\
**Showing post:** 56

<div class="post-metadata">

**Author:** ![Edwin](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/edwin/32/13481_2.png) [@Edwin](https://forum.snapmaker.com/u/Edwin)\
**Post date:** [January 19, 2021, 1:34am UTC](https://forum.snapmaker.com/t/fyi-source-code-of-snapmaker-firmware/5680/56 "2021-01-19T01:34:08Z")

</div>

Snapmaker2-Modules is an all-in-one firmware for Modules of Snapmaker 2.0 3-in-1 3D Printers, it gets the Device Id of the current module from flash and then performs different business logic accordingly.

- Open source for modules:  
[GitHub - Snapmaker/Snapmaker2-Modules](https://github.com/Snapmaker/Snapmaker2-Modules)
- Open source for Controller:  
[GitHub - Snapmaker/Snapmaker2-Controller: Snapmaker2-Controller is the firmware for Snapmaker 2.0 3-in-1 3D Printers.](https://github.com/Snapmaker/Snapmaker2-Controller)

---

_[View the full topic](https://forum.snapmaker.com/t/fyi-source-code-of-snapmaker-firmware/5680)._