# FYI: Snapmaker 2 & Enclosure Fan Information plus alternatives

**URL:** <https://forum.snapmaker.com/t/fyi-snapmaker-2-enclosure-fan-information-plus-alternatives/8612>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [August 24, 2020, 8:08pm UTC](https://forum.snapmaker.com/t/fyi-snapmaker-2-enclosure-fan-information-plus-alternatives/8612 "2020-08-24T20:08:41Z")\
**Posts on this page:** 1\
**Showing post:** 51

<div class="post-metadata">

**Author:** ![brent113](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/brent113/32/11114_2.png) [@brent113](https://forum.snapmaker.com/u/brent113)\
**Post date:** [December 2, 2021, 3:21am UTC](https://forum.snapmaker.com/t/fyi-snapmaker-2-enclosure-fan-information-plus-alternatives/8612/51 "2021-12-02T03:21:38Z")

</div>

> [@Exteme loud power supply fan](https://forum.snapmaker.com/t/exteme-loud-power-supply-fan/9369/7):
>
> My solution was to replace the built in case fan with a quieter one from Amazon. I went with a 5 pack because I can use the rest around in projects, I got these: FYI, those particular fans (and others I’m sure) have a different plug polarity (black and red are switched compared to the stock fan). If you replace fans, double check the plug polarity!

---

_[View the full topic](https://forum.snapmaker.com/t/fyi-snapmaker-2-enclosure-fan-information-plus-alternatives/8612)._