# FYI: Snapmaker 2 All-Metal Hotend Simple Mod

**URL:** <https://forum.snapmaker.com/t/fyi-snapmaker-2-all-metal-hotend-simple-mod/10046>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [October 2, 2020, 10:47pm UTC](https://forum.snapmaker.com/t/fyi-snapmaker-2-all-metal-hotend-simple-mod/10046 "2020-10-02T22:47:57Z")\
**Posts on this page:** 5\
**Page:** 5

<div class="post-metadata">

**Author:** ![Blackavid](https://avatars.discourse-cdn.com/v4/letter/b/35a633/32.png) [@Blackavid](https://forum.snapmaker.com/u/Blackavid)\
**Post date:** [November 16, 2022, 10:30am UTC](https://forum.snapmaker.com/t/fyi-snapmaker-2-all-metal-hotend-simple-mod/10046/82 "2022-11-16T10:30:37Z")

</div>

I had heatcreep with this Brozzl heatbreak. Weird thing but I might change the blower fan to a stronger one.

---

<div class="post-metadata">

**Author:** ![Blackavid](https://avatars.discourse-cdn.com/v4/letter/b/35a633/32.png) [@Blackavid](https://forum.snapmaker.com/u/Blackavid)\
**Post date:** [February 22, 2023, 3:46pm UTC](https://forum.snapmaker.com/t/fyi-snapmaker-2-all-metal-hotend-simple-mod/10046/83 "2023-02-22T15:46:14Z")

</div>

I had some tests again running with different nozzles. Had no problems with other materials 👍🏼

---

<div class="post-metadata">

**Author:** ![nweolu](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/nweolu/32/23079_2.png) [@nweolu](https://forum.snapmaker.com/u/nweolu)\
**Post date:** [June 4, 2023, 12:06pm UTC](https://forum.snapmaker.com/t/fyi-snapmaker-2-all-metal-hotend-simple-mod/10046/84 "2023-06-04T12:06:58Z")

</div>

Thanks for sharing knowledge, I followed your steps and got some good results. Didn’t have to get a new fan with some light modification of the print head to improve air flow.

> [@CHT Nozzle 0.6 mm, All metal heatbreak, High temperature prints ASA & ABS](https://forum.snapmaker.com/t/cht-nozzle-0-6-mm-all-metal-heatbreak-high-temperature-prints-asa-abs/31612/2):
>
> Beautiful write up! I was using a similar setup in my previous snapmaker 2.0 extruders, but I never quite got the heat creep out of the machine when printing nylon or anything with temps over 260C. I’m glad to hear yours is working well!

---

<div class="post-metadata">

**Author:** ![Ulukaii](https://avatars.discourse-cdn.com/v4/letter/u/87869e/32.png) [@Ulukaii](https://forum.snapmaker.com/u/Ulukaii)\
**Post date:** [May 17, 2024, 7:23pm UTC](https://forum.snapmaker.com/t/fyi-snapmaker-2-all-metal-hotend-simple-mod/10046/85 "2024-05-17T19:23:18Z")

</div>

I have problems removing the old heatbreak from the heat block, any advice?

---

<div class="post-metadata">

**Author:** ![Mxbrnr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/mxbrnr/32/27569_2.png) [@Mxbrnr](https://forum.snapmaker.com/u/Mxbrnr)\
**Post date:** [May 17, 2024, 9:39pm UTC](https://forum.snapmaker.com/t/fyi-snapmaker-2-all-metal-hotend-simple-mod/10046/86 "2024-05-17T21:39:42Z")

</div>

You may need to heat it up first.

[Previous page](https://forum.snapmaker.com/t/fyi-snapmaker-2-all-metal-hotend-simple-mod/10046.md?page=4)