# Fusion360 DXF to Luban small dimension importing completley wrong

**URL:** <https://forum.snapmaker.com/t/fusion360-dxf-to-luban-small-dimension-importing-completley-wrong/36166>\
**Category:** Snapmaker Luban\
**Created:** [June 17, 2024, 3:22pm UTC](https://forum.snapmaker.com/t/fusion360-dxf-to-luban-small-dimension-importing-completley-wrong/36166 "2024-06-17T15:22:38Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![DennisH](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/dennish/32/26228_2.png) [@DennisH](https://forum.snapmaker.com/u/DennisH)\
**Post date:** [June 17, 2024, 3:22pm UTC](https://forum.snapmaker.com/t/fusion360-dxf-to-luban-small-dimension-importing-completley-wrong/36166/1 "2024-06-17T15:22:38Z")

</div>

I am testing import DXF files from Fusion into Luban laser space, using up to date versions of both. I have quite complex files to import but am stumbling at the most simple dxf import.

Each files consist of centre rectangle sizes in mm of 10x10, 25x25,50x50, if i import to lightburn sizes import OK but I dont want to learn another program!

When I import a 10mm x 10mm cube or (25x25) into Luban it comes in as 30mmx30mm why is this?