# Fusion und Rotary Modul **URL:** \ **Category:** Snapmaker 2.0 (3-in-1)\ **Created:** [August 8, 2021, 9:48am UTC](https://forum.snapmaker.com/t/fusion-und-rotary-modul/20311 "2021-08-08T09:48:37Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![Georg2](https://avatars.discourse-cdn.com/v4/letter/g/e9c0ed/32.png) [@Georg2](https://forum.snapmaker.com/u/Georg2)\ **Post date:** [August 8, 2021, 9:48am UTC](https://forum.snapmaker.com/t/fusion-und-rotary-modul/20311/1 "2021-08-08T09:48:37Z")
Hello everybody, i have already milled a few things with the rotary module. The sample file the lions. Then I created my own STL file. With this I generated the Gcode in Luban. I used several steps for the depth. As a result, I had several rotational offsets in the model. The same model with 1 deep pass again worked perfectly. I then wanted to work on the whole thing in Fusion. When generating the Gcode I only get the error message that the machine does not support the rotation. I thought the post processor would support this. For help, I would be grateful. ---
**Author:** ![Artezio](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/artezio/32/15834_2.png) [@Artezio](https://forum.snapmaker.com/u/Artezio)\ **Post date:** [August 8, 2021, 11:27am UTC](https://forum.snapmaker.com/t/fusion-und-rotary-modul/20311/2 "2021-08-08T11:27:47Z")
@Georg2 if you’re using the free version of fusion, you don’t have the 4th axis support. They only give you that in the paid version. ---
**Author:** ![Georg2](https://avatars.discourse-cdn.com/v4/letter/g/e9c0ed/32.png) [@Georg2](https://forum.snapmaker.com/u/Georg2)\ **Post date:** [August 8, 2021, 11:30am UTC](https://forum.snapmaker.com/t/fusion-und-rotary-modul/20311/3 "2021-08-08T11:30:33Z")
I currently have a Fusion subscription. With a 7 day test for the rotary axis. ![Figuren 3](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/b/b311f88c19e0ed275f1c2835498cb97bcb50bc77.jpeg) ---
**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\ **Post date:** [August 8, 2021, 11:49am UTC](https://forum.snapmaker.com/t/fusion-und-rotary-modul/20311/4 "2021-08-08T11:49:06Z")
Interesting. I guess you need to email support, not sure if the postprocessor supports the rotary module right now. There was no update, i guess. ---
**Author:** ![Georg2](https://avatars.discourse-cdn.com/v4/letter/g/e9c0ed/32.png) [@Georg2](https://forum.snapmaker.com/u/Georg2)\ **Post date:** [August 8, 2021, 11:53am UTC](https://forum.snapmaker.com/t/fusion-und-rotary-modul/20311/5 "2021-08-08T11:53:58Z")
[Fusion 360 setup for Rotary Module - Snapmaker 2.0 - Snapmaker: where creation happens](https://forum.snapmaker.com/t/fusion-360-setup-for-rotary-module/17892) Thought that happened. ---
**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\ **Post date:** [August 8, 2021, 3:54pm UTC](https://forum.snapmaker.com/t/fusion-und-rotary-modul/20311/6 "2021-08-08T15:54:12Z")
Thanks for the link, didn’t knew that. ---
**Author:** ![Artezio](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/artezio/32/15834_2.png) [@Artezio](https://forum.snapmaker.com/u/Artezio)\ **Post date:** [August 8, 2021, 7:14pm UTC](https://forum.snapmaker.com/t/fusion-und-rotary-modul/20311/7 "2021-08-08T19:14:44Z")
> [@Georg2](#): > > I currently have a Fusion subscription. With a 7 day test for the rotary axis. Ok cool, it sounds like Snapmaker hasn’t verified the 4th axis compatibility with fusion. ---
**Author:** ![gene2598](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/gene2598/32/3865_2.png) [@gene2598](https://forum.snapmaker.com/u/gene2598)\ **Post date:** [August 15, 2021, 2:22am UTC](https://forum.snapmaker.com/t/fusion-und-rotary-modul/20311/8 "2021-08-15T02:22:21Z")
I’ve been working on laser etching with the rotary module. My latest project ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/c/ce0ce62be14309a9558ec9198e79d23c0deeb4f6.jpeg) I actually did a second one with much better quality of etching. Just had to increase the density per mm and focus the laser a little better. ---
**Author:** ![MooseJuice](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/moosejuice/32/10684_2.png) [@MooseJuice](https://forum.snapmaker.com/u/MooseJuice)\ **Post date:** [August 15, 2021, 3:58pm UTC](https://forum.snapmaker.com/t/fusion-und-rotary-modul/20311/9 "2021-08-15T15:58:44Z")
Thats really neat thank you for sharing ---
**Author:** ![smhoover](https://avatars.discourse-cdn.com/v4/letter/s/bc79bd/32.png) [@smhoover](https://forum.snapmaker.com/u/smhoover)\ **Post date:** [August 31, 2021, 5:59am UTC](https://forum.snapmaker.com/t/fusion-und-rotary-modul/20311/10 "2021-08-31T05:59:31Z")
Where is your origin in fusion and how is the z axis oriented? I ran into a error when I posted my gcode with fusion but I re-setup/defined my origin/axis and it solved the problem. Origin on the front face, center of the axis, z up. Fusion free doesn’t support the newer multiaxis rotary toolpath but you can still use the rotary like an indexing head to do 3+1 machining.