# Fusion 360, luban, dxf files won't load properly

**URL:** <https://forum.snapmaker.com/t/fusion-360-luban-dxf-files-wont-load-properly/7344>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [June 28, 2020, 2:18pm UTC](https://forum.snapmaker.com/t/fusion-360-luban-dxf-files-wont-load-properly/7344 "2020-06-28T14:18:43Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![RiSKeYBiSNuS](https://avatars.discourse-cdn.com/v4/letter/r/e19b73/32.png) [@RiSKeYBiSNuS](https://forum.snapmaker.com/u/RiSKeYBiSNuS)\
**Post date:** [June 28, 2020, 2:18pm UTC](https://forum.snapmaker.com/t/fusion-360-luban-dxf-files-wont-load-properly/7344/1 "2020-06-28T14:18:44Z")

</div>

Hi guys, I have yet to receive my snap maker, I’m a CNC Machinist by trade so none of this is new to me.

I’m using fusion 360 to make my drawings ect. I’m using dxf as my export file type. For some reason when I import the dxf file into luban it suddenly puts lines where lines shouldn’t be and deletes other lines.

The dxf files open properly on other programs.

Ps is there anything besides luban that can be used to generate the g code for this machine. I am fimilar with post processor files as well so changing some values to output code properly is no issue for me.

I run mastercam… Idk what the heck is happening here. The files open fine in other software. But not luban.

---

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [June 29, 2020, 8:34am UTC](https://forum.snapmaker.com/t/fusion-360-luban-dxf-files-wont-load-properly/7344/2 "2020-06-29T08:34:03Z")

</div>

Luban can´t create a gcode for the cnc tool. Haven´t used the cnc yet.

Have a look at this:

> [@Snapmaker Academy: Fusion 360 CAD & CAM Tutorial for CNC Beginners](https://forum.snapmaker.com/t/snapmaker-academy-fusion-360-cad-cam-tutorial-for-cnc-beginners/7182):
>
> New to Fusion 360 and cnc milling? Come and check this Fusion 360 CAD and CAM video tutorial that is super friendly for CNC beginners. In episode 2 of Snapmaker Academy, we’ll show you how to create a 3d model, set up the manufacturing process, and carve it out with Snapmaker, from start to finish. Guess it would be a great opportunity to explore the world of model designing and CNC stuff. grin[[Fusion 360 CAD & CAM Tutorial for CNC Beginners [Snapmaker Academy]] ](https://www.youtube.com/watch?v=h3vMEiMTlio)

---

<div class="post-metadata">

**Author:** ![RiSKeYBiSNuS](https://avatars.discourse-cdn.com/v4/letter/r/e19b73/32.png) [@RiSKeYBiSNuS](https://forum.snapmaker.com/u/RiSKeYBiSNuS)\
**Post date:** [June 29, 2020, 6:18pm UTC](https://forum.snapmaker.com/t/fusion-360-luban-dxf-files-wont-load-properly/7344/3 "2020-06-29T18:18:55Z")

</div>

thank you thank you i was under the assumption we had to use the luban software in specific. im new to fusion and im not certain what it all does. thank you

---

<div class="post-metadata">

**Author:** ![Melanchrom](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/melanchrom/32/5202_2.png) [@Melanchrom](https://forum.snapmaker.com/u/Melanchrom)\
**Post date:** [June 29, 2020, 8:40pm UTC](https://forum.snapmaker.com/t/fusion-360-luban-dxf-files-wont-load-properly/7344/4 "2020-06-29T20:40:39Z")

</div>

It does everything 🤩  
(At least inside the cnc workflow from modeling to creating g-code)

---

<div class="post-metadata">

**Author:** ![RiSKeYBiSNuS](https://avatars.discourse-cdn.com/v4/letter/r/e19b73/32.png) [@RiSKeYBiSNuS](https://forum.snapmaker.com/u/RiSKeYBiSNuS)\
**Post date:** [November 14, 2020, 9:13pm UTC](https://forum.snapmaker.com/t/fusion-360-luban-dxf-files-wont-load-properly/7344/6 "2020-11-14T21:13:50Z")

</div>

If only I could figure out how to get autodesk to post laser cutting projects properly now. Might just post with a cutting bit and do some manual code editing M106 P0 S225 for cutting with the laser iirc.

---

<div class="post-metadata">

**Author:** ![RiSKeYBiSNuS](https://avatars.discourse-cdn.com/v4/letter/r/e19b73/32.png) [@RiSKeYBiSNuS](https://forum.snapmaker.com/u/RiSKeYBiSNuS)\
**Post date:** [November 14, 2020, 9:22pm UTC](https://forum.snapmaker.com/t/fusion-360-luban-dxf-files-wont-load-properly/7344/7 "2020-11-14T21:22:40Z")

</div>

Luban in fact does create cnc code … It does not properly import dxf files or dwg files exported from auto desk properly. However, autodesk is a much more powerful tool then luban. After finally getting the post processor file for autodesk things are a bit smoother. Altho the laser tooling will not post after creating a toolpath under the fabrication tab 2d profile.

---

<div class="post-metadata">

**Author:** ![Melanchrom](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/melanchrom/32/5202_2.png) [@Melanchrom](https://forum.snapmaker.com/u/Melanchrom)\
**Post date:** [November 14, 2020, 10:29pm UTC](https://forum.snapmaker.com/t/fusion-360-luban-dxf-files-wont-load-properly/7344/8 "2020-11-14T22:29:12Z")

</div>

Having a laser profile for fusion 360 postprocessor would be great!

---

<div class="post-metadata">

**Author:** ![RiSKeYBiSNuS](https://avatars.discourse-cdn.com/v4/letter/r/e19b73/32.png) [@RiSKeYBiSNuS](https://forum.snapmaker.com/u/RiSKeYBiSNuS)\
**Post date:** [November 15, 2020, 12:07am UTC](https://forum.snapmaker.com/t/fusion-360-luban-dxf-files-wont-load-properly/7344/9 "2020-11-15T00:07:43Z")

</div>

Once I get around to figuring out how to edit the post processor I’ll update. I used to back in my votech class in high school … 12 years ago.

This is so much different then the hass and fanuc controls I’ve edited tho.

---

<div class="post-metadata">

**Author:** ![NathS4](https://avatars.discourse-cdn.com/v4/letter/n/f6c823/32.png) [@NathS4](https://forum.snapmaker.com/u/NathS4)\
**Post date:** [November 19, 2020, 4:58pm UTC](https://forum.snapmaker.com/t/fusion-360-luban-dxf-files-wont-load-properly/7344/10 "2020-11-19T16:58:53Z")

</div>

Thanks for this info, so if i use Fusion 360, i can pretty much do the lot, then just import the gcode into luban for printing?

i get a few errors in luban when ive tried previously, but that may be a mistake ive made in fusion when post processing etc etc.

---

<div class="post-metadata">

**Author:** ![sdj544](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/sdj544/32/11365_2.png) [@sdj544](https://forum.snapmaker.com/u/sdj544)\
**Post date:** [November 19, 2020, 7:01pm UTC](https://forum.snapmaker.com/t/fusion-360-luban-dxf-files-wont-load-properly/7344/11 "2020-11-19T19:01:19Z")

</div>

I use Luban to send my gcode from Fusion to my SM. Then I run it from the SM.  
I don’t like running directly from Luban. Don’t need to tie up my computer or worry about it disconnecting.  
-S

---

<div class="post-metadata">

**Author:** ![NathS4](https://avatars.discourse-cdn.com/v4/letter/n/f6c823/32.png) [@NathS4](https://forum.snapmaker.com/u/NathS4)\
**Post date:** [November 19, 2020, 7:23pm UTC](https://forum.snapmaker.com/t/fusion-360-luban-dxf-files-wont-load-properly/7344/12 "2020-11-19T19:23:47Z")

</div>

cool, what have you got selected within post processing?

sorry, very new to this

---

<div class="post-metadata">

**Author:** ![RiSKeYBiSNuS](https://avatars.discourse-cdn.com/v4/letter/r/e19b73/32.png) [@RiSKeYBiSNuS](https://forum.snapmaker.com/u/RiSKeYBiSNuS)\
**Post date:** [November 19, 2020, 8:33pm UTC](https://forum.snapmaker.com/t/fusion-360-luban-dxf-files-wont-load-properly/7344/13 "2020-11-19T20:33:03Z")

</div>

Are you guys doing 3D printing with fusion ? Is that what I’m getting here ?

Also from what I understand you can put your gcode cnc file on a USB and transfer it right to the android control device on the snap maker.

---

<div class="post-metadata">

**Author:** ![sdj544](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/sdj544/32/11365_2.png) [@sdj544](https://forum.snapmaker.com/u/sdj544)\
**Post date:** [November 19, 2020, 10:51pm UTC](https://forum.snapmaker.com/t/fusion-360-luban-dxf-files-wont-load-properly/7344/14 "2020-11-19T22:51:27Z")

</div>

for 3d printing from fusion I export as STL, then slice in Luban (or Cura).

For cnc create tool paths in Fusion and export gcode.  
I use luban to transfer wirelessly, but usb works too.  
-S
