# Fusion 360 Carving V-Bit and CNC Milling Machine Configuration **URL:** \ **Category:** Snapmaker 2.0 (3-in-1)\ **Created:** [September 13, 2020, 6:55pm UTC](https://forum.snapmaker.com/t/fusion-360-carving-v-bit-and-cnc-milling-machine-configuration/9272 "2020-09-13T18:55:41Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![Drahkar](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/drahkar/32/3626_2.png) [@Drahkar](https://forum.snapmaker.com/u/Drahkar)\ **Post date:** [September 13, 2020, 6:55pm UTC](https://forum.snapmaker.com/t/fusion-360-carving-v-bit-and-cnc-milling-machine-configuration/9272/1 "2020-09-13T18:55:41Z")
I’ve been doing some digging on the site. I’ve found the tools and post processing files on Github here: [Github Files](https://github.com/Snapmaker/snapmaker_cnc_post_process/tree/master/assets/snapmaker-fusion360-configuration-20180730) However none of them appear to contain the milling machine configuration for the Snapmaker 2.0, and while I did find what appears to be a Carving V-Bit in the Original snapmaker tool set, it throws an error that it is not a valid bit for milling. Does anyone have a working CNC Milling machine configuration for the Snapmaker 2.0 and one for the Carving V-Bit? ---
**Author:** ![vromero](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/vromero/32/5940_2.png) [@vromero](https://forum.snapmaker.com/u/vromero)\ **Post date:** [October 2, 2020, 12:49pm UTC](https://forum.snapmaker.com/t/fusion-360-carving-v-bit-and-cnc-milling-machine-configuration/9272/2 "2020-10-02T12:49:03Z")
I have the same problem. No solution found yet. Replying here to pop up the question to the top of the forum. ---
**Author:** ![sdj544](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/sdj544/32/11365_2.png) [@sdj544](https://forum.snapmaker.com/u/sdj544)\ **Post date:** [October 2, 2020, 6:03pm UTC](https://forum.snapmaker.com/t/fusion-360-carving-v-bit-and-cnc-milling-machine-configuration/9272/3 "2020-10-02T18:03:52Z")
It’s a fusion issue. It doesn’t allow you to use an engraving bit for milling. If you select engraving it lets you use it for that. I can’t remember what the workaround was. I think the problem is that the bit tip needs a dimension for computing paths and the solution was to create a bit that had a .01mm cutting diameter. Try searching the Fusion forums. -S ---
**Author:** ![zain](https://avatars.discourse-cdn.com/v4/letter/z/6a8cbe/32.png) [@zain](https://forum.snapmaker.com/u/zain)\ **Post date:** [August 4, 2022, 12:48pm UTC](https://forum.snapmaker.com/t/fusion-360-carving-v-bit-and-cnc-milling-machine-configuration/9272/4 "2022-08-04T12:48:56Z")
Hi @Drahkar So did u find the solution for this? I just got my snapmaker a while ago and also cannot figure this out Thanks ---
**Author:** ![sdj544](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/sdj544/32/11365_2.png) [@sdj544](https://forum.snapmaker.com/u/sdj544)\ **Post date:** [August 4, 2022, 9:19pm UTC](https://forum.snapmaker.com/t/fusion-360-carving-v-bit-and-cnc-milling-machine-configuration/9272/5 "2022-08-04T21:19:31Z")
You have to set it up as a ‘chamfer’ tool: ![Screen Shot 2022-08-04 at 2.18.35 PM](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/0/c/0c06aa1438b0266840cafe80ca8375813e011982.jpeg) Your settings may vary depending on your bit. -S ---
**Author:** ![zain](https://avatars.discourse-cdn.com/v4/letter/z/6a8cbe/32.png) [@zain](https://forum.snapmaker.com/u/zain)\ **Post date:** [August 7, 2022, 5:03am UTC](https://forum.snapmaker.com/t/fusion-360-carving-v-bit-and-cnc-milling-machine-configuration/9272/6 "2022-08-07T05:03:59Z")
thanks, appreciate it ---
**Author:** ![SnowFrog](https://avatars.discourse-cdn.com/v4/letter/s/f6c823/32.png) [@SnowFrog](https://forum.snapmaker.com/u/SnowFrog)\ **Post date:** [November 10, 2022, 11:12pm UTC](https://forum.snapmaker.com/t/fusion-360-carving-v-bit-and-cnc-milling-machine-configuration/9272/7 "2022-11-10T23:12:53Z")
That is definitely not the one I got from Snapmaker. Mine is 3 sided 23mm overall length and the flute is only about 5mm as for the taper I have to guestimate at about 7 ---
**Author:** ![3dgav](https://avatars.discourse-cdn.com/v4/letter/3/ce7236/32.png) [@3dgav](https://forum.snapmaker.com/u/3dgav)\ **Post date:** [November 11, 2022, 3:33am UTC](https://forum.snapmaker.com/t/fusion-360-carving-v-bit-and-cnc-milling-machine-configuration/9272/8 "2022-11-11T03:33:41Z")
just wondering if you can advise on this side topic. I have a bundle of gears to CNC cut do I use on the path or outline setting. Thanks in advance ---
**Author:** ![LietuvaUSA](https://avatars.discourse-cdn.com/v4/letter/l/d6d6ee/32.png) [@LietuvaUSA](https://forum.snapmaker.com/u/LietuvaUSA)\ **Post date:** [May 27, 2023, 6:31am UTC](https://forum.snapmaker.com/t/fusion-360-carving-v-bit-and-cnc-milling-machine-configuration/9272/9 "2023-05-27T06:31:19Z")
I have no clue how your v-bit ended up being so short, guessing you’re measuring below the collet? What really surprises me is that you’re able to read my comment… IT MEANS WE’RE ON THE INTERNET… Have you broken a bit? Here’s the snapmaker official shop which shows all 5 bits (for 3-axis cutting at least). Scroll down for a bit, oh HEY **THERE ARE DETAILS ON EVERY SINGLE BIT** > **[CNC Bits (5 Bits)](https://us.snapmaker.com/collections/3d-printer-accessories/products/cnc-bits-5-bits)** > > Order will be shipped in 1-3 business days after payment confirmation. US local warehouse delivery in 3-7 business days. Five (5) CNC bits included: • Flat End Mill (Single Flute, Cutting Diameter1.5 mm)• Flat End Mill (Double Flute, Cutting... ![V-bit-DUUUUUUHHHHHHHHHHHH](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/2/0/2033c7e6bcb107aad005fd3384cfc88dab220d99.jpeg) @sdj544 .01 cutting diameter? the shop page where you buy a new bit says 0.2mm… Your settings may vary a lot from a 50mm tool length, but not much from the specs of the tool they’ve been pumping out standard… ---
**Author:** ![SnowFrog](https://avatars.discourse-cdn.com/v4/letter/s/f6c823/32.png) [@SnowFrog](https://forum.snapmaker.com/u/SnowFrog)\ **Post date:** [November 22, 2025, 7:00pm UTC](https://forum.snapmaker.com/t/fusion-360-carving-v-bit-and-cnc-milling-machine-configuration/9272/10 "2025-11-22T19:00:47Z")
Are there any remanence of a community on CNC anywhere. I’m finally ready to do stuff with CNC and find so little guidance out there. Luban appears to be a waist of time. There are no model to start/learn with and no one here discussing this. As the song says “where are all the good men gone?” ---
**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\ **Post date:** [November 22, 2025, 7:17pm UTC](https://forum.snapmaker.com/t/fusion-360-carving-v-bit-and-cnc-milling-machine-configuration/9272/11 "2025-11-22T19:17:20Z")
This is a little starter: > [@Snapmaker Academy: Fusion 360 CAD & CAM Tutorial for CNC Beginners](https://forum.snapmaker.com/t/snapmaker-academy-fusion-360-cad-cam-tutorial-for-cnc-beginners/7182): > > New to Fusion 360 and cnc milling? Come and check this Fusion 360 CAD and CAM video tutorial that is super friendly for CNC beginners. In episode 2 of Snapmaker Academy, we’ll show you how to create a 3d model, set up the manufacturing process, and carve it out with Snapmaker, from start to finish. Guess it would be a great opportunity to explore the world of model designing and CNC stuff. grin[[Fusion 360 CAD & CAM Tutorial for CNC Beginners [Snapmaker Academy]] ](https://www.youtube.com/watch?v=h3vMEiMTlio)