# Folders on Snapmaker Storage

**URL:** <https://forum.snapmaker.com/t/folders-on-snapmaker-storage/29905>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [February 28, 2023, 4:04pm UTC](https://forum.snapmaker.com/t/folders-on-snapmaker-storage/29905 "2023-02-28T16:04:24Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Wyphorn](https://avatars.discourse-cdn.com/v4/letter/w/ebca7d/32.png) [@Wyphorn](https://forum.snapmaker.com/u/Wyphorn)\
**Post date:** [February 28, 2023, 4:04pm UTC](https://forum.snapmaker.com/t/folders-on-snapmaker-storage/29905/1 "2023-02-28T16:04:24Z")

</div>

Hey,

Is there any way to create folders on snapmakers touchscreen?  
I would create some basic set of calibration gcodes for the different materials structured in some small folder hierarchy.  
I did not find a way to do so, nor a question for this in the past. How you manage this? Can octoprint help me here?  
I think for retraction tower, temp tower, calibration cube, hole calibration and something like that. So the stuff I normally do when I change the filament and try to print nice stuff.