# First large job with the dual extruder

**URL:** <https://forum.snapmaker.com/t/first-large-job-with-the-dual-extruder/30760>\
**Category:** Showcase & Prints\
**Created:** [April 10, 2023, 8:47pm UTC](https://forum.snapmaker.com/t/first-large-job-with-the-dual-extruder/30760 "2023-04-10T20:47:51Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![takis2003](https://avatars.discourse-cdn.com/v4/letter/t/ee7513/32.png) [@takis2003](https://forum.snapmaker.com/u/takis2003)\
**Post date:** [April 12, 2023, 6:48pm UTC](https://forum.snapmaker.com/t/first-large-job-with-the-dual-extruder/30760/3 "2023-04-12T18:48:21Z")

</div>

I guess I was lucky that the automatic calibration worked first time without any manual intervention. To print the model, I followed the instructions in this post ([Step-by-step creating a two-color Snapmaker print: from Fusion 360 to Luban (with the dual extruder)](https://forum.snapmaker.com/t/step-by-step-creating-a-two-color-snapmaker-print-from-fusion-360-to-luban-with-the-dual-extruder/30351)) but instead of Fusion 360, I used Tinkercad.

I believe you should try and use the dual extruder you purchased. Whatever happens, I think it’s a shame to leave it sitting in its box.

---

_[View the full topic](https://forum.snapmaker.com/t/first-large-job-with-the-dual-extruder/30760)._