# \[First Batch Shipped Out\] FAQs of Dual Extrusion 3D Printing Module for Snapmaker 2.0

**URL:** <https://forum.snapmaker.com/t/first-batch-shipped-out-faqs-of-dual-extrusion-3d-printing-module-for-snapmaker-2-0/27340>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [September 21, 2022, 12:43pm UTC](https://forum.snapmaker.com/t/first-batch-shipped-out-faqs-of-dual-extrusion-3d-printing-module-for-snapmaker-2-0/27340 "2022-09-21T12:43:10Z")\
**Posts on this page:** 1\
**Showing post:** 152

<div class="post-metadata">

**Author:** ![Hauke](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/hauke/32/5704_2.png) [@Hauke](https://forum.snapmaker.com/u/Hauke)\
**Post date:** [March 18, 2023, 6:31pm UTC](https://forum.snapmaker.com/t/first-batch-shipped-out-faqs-of-dual-extrusion-3d-printing-module-for-snapmaker-2-0/27340/152 "2023-03-18T18:31:38Z")

</div>

Just started my first larger print with the DX - and first layer without much tweaking is already soooo much better than anything I could coax from the SX… If they iron out the teething issues, I guess this will be a _very_ capable print head!

 ![grafik](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/6/6/66e6602c7b3c2afa830bafb95c38c4ef812bb063.jpeg)

I’m now on firmware 1.15.21, and it still has the bug that after Z-calibration it starts ~0.3 mm too high into the print. In my current print left extruder needed -0.4 mm, right one -0.35 mm manual Z offset to get it right…

---

_[View the full topic](https://forum.snapmaker.com/t/first-batch-shipped-out-faqs-of-dual-extrusion-3d-printing-module-for-snapmaker-2-0/27340)._