# Firmware updates ever?

**URL:** <https://forum.snapmaker.com/t/firmware-updates-ever/12885>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [December 18, 2020, 6:52pm UTC](https://forum.snapmaker.com/t/firmware-updates-ever/12885 "2020-12-18T18:52:41Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![wje](https://avatars.discourse-cdn.com/v4/letter/w/3ec8ea/32.png) [@wje](https://forum.snapmaker.com/u/wje)\
**Post date:** [December 18, 2020, 6:52pm UTC](https://forum.snapmaker.com/t/firmware-updates-ever/12885/1 "2020-12-18T18:52:41Z")

</div>

Haven’t been any lately. Would be trivial to address some of the long-standing issues, like that idiotic having to confirm on the printer when you want to connect via Luban (when that actually works). I have always supported this project, and still do, but now that it’s done and delivered, how about some real software/firmware support?

PS - I apparently got lucky, mine has performed flawlessly so far, other than lame software. No out-of-sync linear actuators, no uneven bed issues, etc. I just completed some 200x200mm laser engravings, just worked.