# Firmware update issue

**URL:** <https://forum.snapmaker.com/t/firmware-update-issue/18449>\
**Category:** Showcase & Prints\
**Created:** [May 6, 2021, 8:23am UTC](https://forum.snapmaker.com/t/firmware-update-issue/18449 "2021-05-06T08:23:24Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Patrick](https://avatars.discourse-cdn.com/v4/letter/p/b2d939/32.png) [@Patrick](https://forum.snapmaker.com/u/Patrick)\
**Post date:** [May 6, 2021, 8:23am UTC](https://forum.snapmaker.com/t/firmware-update-issue/18449/1 "2021-05-06T08:23:24Z")

</div>

Just installed the new firmware update the work area is now showing 0 x 0 x 0, the machine is a Snapmaker2 A350 has anyone got any ideas what I can do? Tried to calibrate the machine to find it trying to push the laser head through the bed.

---

<div class="post-metadata">

**Author:** ![Edwin](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/edwin/32/13481_2.png) [@Edwin](https://forum.snapmaker.com/u/Edwin)\
**Post date:** [May 6, 2021, 8:55am UTC](https://forum.snapmaker.com/t/firmware-update-issue/18449/2 "2021-05-06T08:55:37Z")

</div>

0 x 0 x 0 means that the controller does not detect any linear modules.  
Unplug the tool-head, and then reboot the machine. Check if the machine is detected well.

Please downgrade the firmware to V1.11.4 and then reboot the machine.

> [@Snapmaker 2.0 Firmware Updates and Downloads](https://forum.snapmaker.com/t/snapmaker-2-0-firmware-updates-and-downloads/5443/12):
>
> Feb 3 2021: Snapmaker2\_V1.11.4 Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware. Changelog Controller Bug Fixes Fix a bug where CNC spindle keeps rotating despite machining session being terminated. Reduce sensitivity of heating protection for hot end to avoid false triggering. Improvement Reduce debounce time for unplug detection of Touchscreen from 10 s to 100 ms. Touch…

---

<div class="post-metadata">

**Author:** ![Patrick](https://avatars.discourse-cdn.com/v4/letter/p/b2d939/32.png) [@Patrick](https://forum.snapmaker.com/u/Patrick)\
**Post date:** [May 6, 2021, 9:21am UTC](https://forum.snapmaker.com/t/firmware-update-issue/18449/3 "2021-05-06T09:21:22Z")

</div>

Really strange I have left the updated version on V.12 and it is now detecting the correct work area with the tool-head, I followed your instructions and unplugged the tool head and rebooted the machine, work area corrected itself, then I powered down reattached the tool head and powered up again the work area is still correct. There seemed to be a problem when I updated the firmware with the tool head attached. Is that normal should I unplug the tool head every time I update the firmware?

---

<div class="post-metadata">

**Author:** ![Edwin](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/edwin/32/13481_2.png) [@Edwin](https://forum.snapmaker.com/u/Edwin)\
**Post date:** [May 6, 2021, 9:31am UTC](https://forum.snapmaker.com/t/firmware-update-issue/18449/4 "2021-05-06T09:31:15Z")

</div>

It is not normal. Please keep eyes on this issue and see if it will reoccur.

Sorry for the inconvenience.  
Edwin

---

<div class="post-metadata">

**Author:** ![Patrick](https://avatars.discourse-cdn.com/v4/letter/p/b2d939/32.png) [@Patrick](https://forum.snapmaker.com/u/Patrick)\
**Post date:** [May 6, 2021, 9:32am UTC](https://forum.snapmaker.com/t/firmware-update-issue/18449/5 "2021-05-06T09:32:10Z")

</div>

Thank you I will Regards Patrick
