# Filament is stuck - Dual Extruder **URL:** \ **Category:** Snapmaker 2.0 (3-in-1)\ **Tags:** Slicer\_Profile\ **Created:** [March 31, 2023, 12:08pm UTC](https://forum.snapmaker.com/t/filament-is-stuck-dual-extruder/30610 "2023-03-31T12:08:45Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![Barracuda](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/barracuda/32/18886_2.png) [@Barracuda](https://forum.snapmaker.com/u/Barracuda)\ **Post date:** [March 31, 2023, 12:08pm UTC](https://forum.snapmaker.com/t/filament-is-stuck-dual-extruder/30610/1 "2023-03-31T12:08:45Z")
I have the same problem, the filament is stuck in the hotend but always the right left no problem. What now ?? ---
**Author:** ![Mads0100](https://avatars.discourse-cdn.com/v4/letter/m/4af34b/32.png) [@Mads0100](https://forum.snapmaker.com/u/Mads0100)\ **Post date:** [March 31, 2023, 5:54pm UTC](https://forum.snapmaker.com/t/filament-is-stuck-dual-extruder/30610/2 "2023-03-31T17:54:58Z")
There isn’t a fix… basically just waiting for snappy to tell us what’s wrong and give guidance. ---
**Author:** ![Wyphorn](https://avatars.discourse-cdn.com/v4/letter/w/ebca7d/32.png) [@Wyphorn](https://forum.snapmaker.com/u/Wyphorn)\ **Post date:** [April 2, 2023, 12:11pm UTC](https://forum.snapmaker.com/t/filament-is-stuck-dual-extruder/30610/3 "2023-04-02T12:11:17Z")
After some successful prints, i had three times clogging Yesterday again. Thats so frustrating ---
**Author:** ![Mads0100](https://avatars.discourse-cdn.com/v4/letter/m/4af34b/32.png) [@Mads0100](https://forum.snapmaker.com/u/Mads0100)\ **Post date:** [April 2, 2023, 3:13pm UTC](https://forum.snapmaker.com/t/filament-is-stuck-dual-extruder/30610/4 "2023-04-02T15:13:02Z")
I bought an declogger. They’re on amazon and Etsy. I was having clogs in my right nozzle and I unloaded it and pushed it out. Didn’t help my left nozzle which had a piece of broken filament in it and the stuff in the nozzle was carbon/gooey. Declogger seems to work well. ---
**Author:** ![Barracuda](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/barracuda/32/18886_2.png) [@Barracuda](https://forum.snapmaker.com/u/Barracuda)\ **Post date:** [April 5, 2023, 11:50am UTC](https://forum.snapmaker.com/t/filament-is-stuck-dual-extruder/30610/5 "2023-04-05T11:50:25Z")
Do you want to print non-stop? YES YES Keep it cool.Dual extruder Snapmaker 2.0 right extruder getting clogged **solution !!!** Nice sales pitch In addition to removing support, it is also difficult to get filament residue out of a jammed nozzle. Hopefully you won’t have to deal with it for long with the dual extrusion module with the \*\*dual extruder type 2023 \*\* **Well not .** ---
**Author:** ![Valen](https://avatars.discourse-cdn.com/v4/letter/v/9dc877/32.png) [@Valen](https://forum.snapmaker.com/u/Valen)\ **Post date:** [April 5, 2023, 3:56pm UTC](https://forum.snapmaker.com/t/filament-is-stuck-dual-extruder/30610/6 "2023-04-05T15:56:44Z")
Just a sanity check: What filament do you use in the right extruder? I had the same problem with my right extruder. I always used the breakaway support material when testing the dual extruder head. The Breakaway support needs ~20° more than pure PLA. After setting the right temperature, everything worked. ---
**Author:** ![Barracuda](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/barracuda/32/18886_2.png) [@Barracuda](https://forum.snapmaker.com/u/Barracuda)\ **Post date:** [April 6, 2023, 12:17pm UTC](https://forum.snapmaker.com/t/filament-is-stuck-dual-extruder/30610/7 "2023-04-06T12:17:53Z")
I use PLA in both extruders ---
**Author:** ![toejough](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/toejough/32/10659_2.png) [@toejough](https://forum.snapmaker.com/u/toejough)\ **Post date:** [July 18, 2023, 2:19am UTC](https://forum.snapmaker.com/t/filament-is-stuck-dual-extruder/30610/8 "2023-07-18T02:19:59Z")
any other updates on this, maybe in another thread I just haven’t found? I also had the right extruder get stuck, and I can’t figure out what to do about it. This is common, I take it? I just got my extruder a little bit ago. ---
**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\ **Post date:** [July 18, 2023, 5:49pm UTC](https://forum.snapmaker.com/t/filament-is-stuck-dual-extruder/30610/9 "2023-07-18T17:49:31Z")
> [@Dual Extrusion Head: Heat creep discussion thread](https://forum.snapmaker.com/t/dual-extrusion-head-heat-creep-discussion-thread/30010/114): > > Hi all, so finally got around trying the new door design, and it was a full success! The model that failed after less than 20 mins before, now went through in 7 hours. The filament does not show any hint of broadening/heat creep, neither on left nor on right nozzle. Already informed support about the success, now waiting patiently for what they make from it - my assumption is that they’ll release a new front door and send this to those affected. I am curious how many this might be - would you m… > [@\[First Batch Shipped Out\] FAQs of Dual Extrusion 3D Printing Module for Snapmaker 2.0](https://forum.snapmaker.com/t/first-batch-shipped-out-faqs-of-dual-extrusion-3d-printing-module-for-snapmaker-2-0/27340/109): > > Hallo, @brewery.chump0x Klar teile ich es mit Dir / Euch. Anbei die STL und Auszüge aus der Mail vom Support an mich. Grüße —————————————- Hello, @brewery.chump0x Of course I share it with you. Attached is the STL and excerpts from the email from support to me. Greetings [Block.stl](https://forum.snapmaker.com/uploads/short-url/8a8NaInmjOtKXbU6GoNqt2mv3nR.stl) (158.2 KB)