# Filament feed gear coming unlatched

**URL:** <https://forum.snapmaker.com/t/filament-feed-gear-coming-unlatched/30526>\
**Category:** Artisan (3-in-1)\
**Created:** [March 26, 2023, 6:07pm UTC](https://forum.snapmaker.com/t/filament-feed-gear-coming-unlatched/30526 "2023-03-26T18:07:53Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Spaced](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@Spaced](https://forum.snapmaker.com/u/Spaced)\
**Post date:** [March 26, 2023, 7:28pm UTC](https://forum.snapmaker.com/t/filament-feed-gear-coming-unlatched/30526/5 "2023-03-26T19:28:55Z")

</div>

yeah print the wedge you can find on the forums it works wonders.

> [@\[First Batch Shipped Out\] FAQs of Dual Extrusion 3D Printing Module for Snapmaker 2.0](https://forum.snapmaker.com/t/first-batch-shipped-out-faqs-of-dual-extrusion-3d-printing-module-for-snapmaker-2-0/27340/109):
>
> Hallo, @brewery.chump0x Klar teile ich es mit Dir / Euch. Anbei die STL und Auszüge aus der Mail vom Support an mich. Grüße —————————————- Hello, @brewery.chump0x Of course I share it with you. Attached is the STL and excerpts from the email from support to me. Greetings [Block.stl](https://forum.snapmaker.com/uploads/short-url/8a8NaInmjOtKXbU6GoNqt2mv3nR.stl) (158.2 KB)

---

_[View the full topic](https://forum.snapmaker.com/t/filament-feed-gear-coming-unlatched/30526)._