# Extruder feed check/adjustment

**URL:** <https://forum.snapmaker.com/t/extruder-feed-check-adjustment/34271>\
**Category:** J1/J1s IDEX\
**Created:** [December 25, 2023, 6:36pm UTC](https://forum.snapmaker.com/t/extruder-feed-check-adjustment/34271 "2023-12-25T18:36:45Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\
**Post date:** [January 5, 2024, 7:37pm UTC](https://forum.snapmaker.com/t/extruder-feed-check-adjustment/34271/6 "2024-01-05T19:37:21Z")

</div>

I guess you need a (newer or) other version of Luban or terminal programm.

As you can see here, the response was working in the past:

> [@OctoPrint with the Snapmaker J1 / settings and help](https://forum.snapmaker.com/t/octoprint-with-the-snapmaker-j1-settings-and-help/29551/3):
>
> German: Danke, für den Tipp. Ich bin mir nicht sicher, ob ich das Ergebnis richtig auswerten kann. English: Thanks for the tip. I’m not sure if I can evaluate the result correctly. Send: M503 Recv: echo: G21 ; Units in mm (mm) Recv: Recv: echo:; Filament settings: Disabled Recv: echo: M200 T0 D1.75 Recv: echo: M200 T1 D1.75 Recv: echo: M200 S0 Recv: echo:; Steps per unit: Recv: echo: M92 X80.00 Y80.00 Z1600.00 E138.58 Recv: echo:; Maximum feedrates (units/s): Recv: echo:…

---

_[View the full topic](https://forum.snapmaker.com/t/extruder-feed-check-adjustment/34271)._