# Ethernet Connection

**URL:** <https://forum.snapmaker.com/t/ethernet-connection/40013>\
**Category:** Artisan (3-in-1)\
**Created:** [September 9, 2025, 5:33pm UTC](https://forum.snapmaker.com/t/ethernet-connection/40013 "2025-09-09T17:33:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![USDDonaldGarage](https://avatars.discourse-cdn.com/v4/letter/u/7c8e57/32.png) [@USDDonaldGarage](https://forum.snapmaker.com/u/USDDonaldGarage)\
**Post date:** [September 9, 2025, 5:33pm UTC](https://forum.snapmaker.com/t/ethernet-connection/40013/1 "2025-09-09T17:33:01Z")

</div>

Is it possible to connect the Artisan and A350 to ethernet? My work has a couple and only allows ethernet connections for printers? I tried just plugging in a dongle with no luck, but maybe I am missing a step.

---

<div class="post-metadata">

**Author:** ![Hauke](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/hauke/32/5704_2.png) [@Hauke](https://forum.snapmaker.com/u/Hauke)\
**Post date:** [September 9, 2025, 6:53pm UTC](https://forum.snapmaker.com/t/ethernet-connection/40013/2 "2025-09-09T18:53:37Z")

</div>

For Snapmaker 2.0 it is possible - I use this since day 1 of having my SM2: [Works: USB to Ethernet adapter](https://forum.snapmaker.com/t/works-usb-to-ethernet-adapter/8074) That said, I have one dongle that does not work - I suppose the drivers are missing. But In total tried at least three dongles, of which all but one worked.

For Artisan I cannot speak, but I would assume the same.