# Enclosure tool rack **URL:** \ **Category:** Showcase & Prints\ **Created:** [March 29, 2021, 4:16pm UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386 "2021-03-29T16:16:59Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![FAS](https://avatars.discourse-cdn.com/v4/letter/f/ad7895/32.png) [@FAS](https://forum.snapmaker.com/u/FAS)\ **Post date:** [March 29, 2021, 4:16pm UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/1 "2021-03-29T16:16:59Z")
I created this tool rack that hangs off the enclosure. No need to bolt, it slides in and hangs on either side. It was designed for the A250 enclosure, but I’m thinking they probably all use the same aluminum extruded parts, just different lengths, so it should maybe fit all three enclosures? It lives at thingiverse - [Snapmaker 2 enclosure tool caddy by FAS66 - Thingiverse](https://www.thingiverse.com/thing:4810364) ![IMG_3020](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/2/2d2acd5740fe73c771ad41ede4c73161713c4d2c.jpeg) ---
**Author:** ![sdj544](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/sdj544/32/11365_2.png) [@sdj544](https://forum.snapmaker.com/u/sdj544)\ **Post date:** [March 29, 2021, 4:54pm UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/2 "2021-03-29T16:54:43Z")
I like that! Been thinking I needed something like that but haven’t taken the time to figure it out. I’m using 2020 extrusion so I can check and see if it works fine on that or needs modification. -S ---
**Author:** ![FAS](https://avatars.discourse-cdn.com/v4/letter/f/ad7895/32.png) [@FAS](https://forum.snapmaker.com/u/FAS)\ **Post date:** [March 29, 2021, 5:46pm UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/3 "2021-03-29T17:46:11Z")
I don’t know what 2020 extrusion means 😀 Here’s the bit that slips into the cross piece if you want to just test that. OK, I can’t attach files so I’ll post to thingiverse and give the link… ---
**Author:** ![FAS](https://avatars.discourse-cdn.com/v4/letter/f/ad7895/32.png) [@FAS](https://forum.snapmaker.com/u/FAS)\ **Post date:** [March 29, 2021, 6:07pm UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/4 "2021-03-29T18:07:49Z")
Hers a link to just the piece that slides into the beam for testing - > **[Snapmaker 2 enclosure slider by FAS66](https://www.thingiverse.com/thing:4810500)** > > This is a small slider sized to fit into the slots on the top beam of a Snapmaker 2.0 enclosure. It is meant to be a building block to create your own design to hang off the enclosure. ---
**Author:** ![Edwin](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/edwin/32/13481_2.png) [@Edwin](https://forum.snapmaker.com/u/Edwin)\ **Post date:** [March 30, 2021, 3:01am UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/5 "2021-03-30T03:01:28Z")
---
**Author:** ![Edwin](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/edwin/32/13481_2.png) [@Edwin](https://forum.snapmaker.com/u/Edwin)\ **Post date:** [March 30, 2021, 3:02am UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/6 "2021-03-30T03:02:30Z")
@FAS I really like this idea. This post has been pinned on the top of this section. I will PM you later. Cheers Edwin ---
**Author:** ![Filmman586](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/filmman586/32/11541_2.png) [@Filmman586](https://forum.snapmaker.com/u/Filmman586)\ **Post date:** [March 30, 2021, 3:04pm UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/7 "2021-03-30T15:04:20Z")
Do you have the fusion file too you can post? ---
**Author:** ![FAS](https://avatars.discourse-cdn.com/v4/letter/f/ad7895/32.png) [@FAS](https://forum.snapmaker.com/u/FAS)\ **Post date:** [March 30, 2021, 9:41pm UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/8 "2021-03-30T21:41:33Z")
I built it in Vectorworks. I can export but not as a fusion 360. Will a .dwg or .dxf file work? Or something else? And what’s the best place to post the file? ---
**Author:** ![FAS](https://avatars.discourse-cdn.com/v4/letter/f/ad7895/32.png) [@FAS](https://forum.snapmaker.com/u/FAS)\ **Post date:** [March 30, 2021, 9:43pm UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/9 "2021-03-30T21:43:37Z")
@Edwin, can you confirm that it will work on any enclosure - that they all use the same aluminum extrusion for the top beams? Thanks! ---
**Author:** ![Filmman586](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/filmman586/32/11541_2.png) [@Filmman586](https://forum.snapmaker.com/u/Filmman586)\ **Post date:** [March 30, 2021, 11:37pm UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/10 "2021-03-30T23:37:05Z")
You can actually upload it to thingiverse, and have people grab it from there, I think. ---
**Author:** ![Edwin](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/edwin/32/13481_2.png) [@Edwin](https://forum.snapmaker.com/u/Edwin)\ **Post date:** [March 31, 2021, 2:45am UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/11 "2021-03-31T02:45:09Z")
@FAS Hope you have received my message. You’d better upload the STL file in [thingiverse](https://www.thingiverse.com/) and share a link here. Edwin ---
**Author:** ![sdj544](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/sdj544/32/11365_2.png) [@sdj544](https://forum.snapmaker.com/u/sdj544)\ **Post date:** [March 31, 2021, 7:25am UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/12 "2021-03-31T07:25:20Z")
> [@Filmman586](#): > > You can actually upload it to thingiverse, and have people grab it from there, I think. You mean like the link he shared in his original post? -S ---
**Author:** ![Filmman586](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/filmman586/32/11541_2.png) [@Filmman586](https://forum.snapmaker.com/u/Filmman586)\ **Post date:** [March 31, 2021, 8:04am UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/13 "2021-03-31T08:04:20Z")
I Think so, I’ve seen other people on Thingiverse share there CAD file. ---
**Author:** ![FAS](https://avatars.discourse-cdn.com/v4/letter/f/ad7895/32.png) [@FAS](https://forum.snapmaker.com/u/FAS)\ **Post date:** [April 1, 2021, 6:01pm UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/14 "2021-04-01T18:01:32Z")
@Edwin I did get your message - I replied and got an automated response. ---
**Author:** ![FAS](https://avatars.discourse-cdn.com/v4/letter/f/ad7895/32.png) [@FAS](https://forum.snapmaker.com/u/FAS)\ **Post date:** [April 1, 2021, 6:03pm UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/15 "2021-04-01T18:03:41Z")
@Filmman586 what file format should I post it as? I don’t have fusion 360. It is currently a .vwx file… ---
**Author:** ![Filmman586](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/filmman586/32/11541_2.png) [@Filmman586](https://forum.snapmaker.com/u/Filmman586)\ **Post date:** [April 1, 2021, 6:37pm UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/16 "2021-04-01T18:37:34Z")
Try that one. I’ll see if I can use it. Thanks! ---
**Author:** ![brent113](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/brent113/32/11114_2.png) [@brent113](https://forum.snapmaker.com/u/brent113)\ **Post date:** [April 1, 2021, 6:39pm UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/17 "2021-04-01T18:39:10Z")
Can just import the stl into fusion and project it onto a sketch, replicate the dimensions, and extrude, then delete the original stl. would only take about a minute ---
**Author:** ![FAS](https://avatars.discourse-cdn.com/v4/letter/f/ad7895/32.png) [@FAS](https://forum.snapmaker.com/u/FAS)\ **Post date:** [April 2, 2021, 1:37am UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/18 "2021-04-02T01:37:19Z")
I added the Vectorworks file if that helps… ---
**Author:** ![gpmorris](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/gpmorris/32/8529_2.png) [@gpmorris](https://forum.snapmaker.com/u/gpmorris)\ **Post date:** [April 3, 2021, 6:05pm UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/19 "2021-04-03T18:05:31Z")
I can confirm that this little extrusion works great with the enclosure. In fact of modified it in tinker CAD. ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/b/b2359e2ed87de34b0ed1119afc741da151b8677e.jpeg) This my first attempt at contributing to this forum. I hope the attached comes through. > **[SM2Bracket by Gmorris](https://www.thingiverse.com/thing:4815919)** > > This is a modification of two STV files in to one in TinkerCAD, including FAS66’s slider > \< https://www.thingiverse.com/thing:4810500 \> . > I plan to print a few of these to allow attachments such as a peg board to mount the “One touch Clamp”... ---
**Author:** ![FAS](https://avatars.discourse-cdn.com/v4/letter/f/ad7895/32.png) [@FAS](https://forum.snapmaker.com/u/FAS)\ **Post date:** [April 4, 2021, 1:49am UTC](https://forum.snapmaker.com/t/enclosure-tool-rack/17386/20 "2021-04-04T01:49:24Z")
Looks great. Are you on an A350? [Next page](https://forum.snapmaker.com/t/enclosure-tool-rack/17386.md?page=2)