# Enclosure firmware outdated

**URL:** <https://forum.snapmaker.com/t/enclosure-firmware-outdated/19587>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [June 30, 2021, 8:03pm UTC](https://forum.snapmaker.com/t/enclosure-firmware-outdated/19587 "2021-06-30T20:03:31Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![djmattc](https://avatars.discourse-cdn.com/v4/letter/d/ed655f/32.png) [@djmattc](https://forum.snapmaker.com/u/djmattc)\
**Post date:** [June 30, 2021, 8:03pm UTC](https://forum.snapmaker.com/t/enclosure-firmware-outdated/19587/1 "2021-06-30T20:03:32Z")

</div>

Hello,

I’m new to Snapmaker and have only done a few prints so far.

Since installing the A350 enclosure, there is a message popping up to inform me that the enclosure firmware is out of date. However, I can’t seem to find any instructions on how to update it. The controller itself it on the latest version. Everything seems to work fine how it is.

Any help/links would be appreciated.

Thanks,

---

<div class="post-metadata">

**Author:** ![brent113](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/brent113/32/11114_2.png) [@brent113](https://forum.snapmaker.com/u/brent113)\
**Post date:** [June 30, 2021, 8:05pm UTC](https://forum.snapmaker.com/t/enclosure-firmware-outdated/19587/2 "2021-06-30T20:05:06Z")

</div>

My understanding is this applies to the enclosure as well. Just load the firmware with the enclosure connected normally, and it will upgrade.

> [@Upgrade the Toolheads Separately with Snapmaker Firmware V1.12.0](https://forum.snapmaker.com/t/upgrade-the-toolheads-separately-with-snapmaker-firmware-v1-12-0/17402):
>
> To use the Emergency Stop Button and the Rotary Module, you need to upgrade all modules to [Snapmaker Firmware V1.12.0](https://s3-us-west-2.amazonaws.com/snapmaker.com/download/firmware/Snapmaker2_V1.12.0.bin), the tool-heads included. With this version of Snapmaker firmware, the Touchscreen will ask you to upgrade three tool-heads with the USB flash drive. You will see the Touchscreen notification “Outdated firmware (Modules) detected. Please visit our website, download the latest version, and update before use.” Notice If you have used all tool-heads (3D printing module, laser eng…