# Elastomers Extruder Mod **URL:** \ **Category:** Original (3-in-1)\ **Created:** [April 24, 2020, 10:10am UTC](https://forum.snapmaker.com/t/elastomers-extruder-mod/6255 "2020-04-24T10:10:51Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\ **Post date:** [April 24, 2020, 10:25am UTC](https://forum.snapmaker.com/t/elastomers-extruder-mod/6255/2 "2020-04-24T10:25:29Z")
Hey, nice work! Here is some more adapter: Flexible Filament adapter is needed > [@Flexible Filament adapter is needed](https://forum.snapmaker.com/t/flexible-filament-adapter-is-needed/1787): > > it is nearly impossible to print flexible filament such as TPU with the default hardware. I have made an adapter that makes it easier. If this piece was incorporated into the heat sink inside the 3d module i think it would be a nice improvement to the filament feed. If they so desire the snapmaker team is free to use the piece I designed however they wish. Link: [https://www.shapeways.com/product/GWK9XQFS7/flexible-filament-adapter-for-snapmaker](https://www.shapeways.com/product/GWK9XQFS7/flexible-filament-adapter-for-snapmaker) My Settings for printing TPU are: Layer height: … --- _[View the full topic](https://forum.snapmaker.com/t/elastomers-extruder-mod/6255)._